Becker 4720 traffic pro Guia Da Instalação
Subject to correction and technical modifications
32
Copyright by Becker GmbH, D-76303 Karlsbad
,QVWDOODWLRQJXLGH
Recommended tool: Cable installation tool for speedometer cables
from VDO, order number: 1999.10.13.000.110
If you require vehicle-specific parts, please consult the vehicle manu-
facturer or your nearest VDO branch.
facturer or your nearest VDO branch.
•
Using a metal saw, saw into the cable approx. 1 mm at right angles
to the profile and break off (Figure 3).
to the profile and break off (Figure 3).
•
Then cut the cable in the centre with side-cutting pliers
(Figure 4).
(Figure 4).
)
For protective hoses with wire netting, the hose and flex ca-
ble can be cut directly with the side-cutting pliers.
ble can be cut directly with the side-cutting pliers.
•
Shorten the protective hose again at both ends up to the plastic
sheathing. Check whether the ends of the flex cable still engage in
the speedometer and the gearbox.
sheathing. Check whether the ends of the flex cable still engage in
the speedometer and the gearbox.
•
Shorten the inner cable to a projection of 13 mm (Figure 5).
•
Connect the union nut and hose sleeve (Figure 6) and push onto the
hose ends (Figure 7).
hose ends (Figure 7).
•
Connect friction washer to dog (Figure 8).
•
Remove grease from flex cable and connect dog to flex cable. Us-
ing a suitable installation tool, press the dog onto the flex cable
(Figure 9).
ing a suitable installation tool, press the dog onto the flex cable
(Figure 9).
)LJXUH
)LJXUH
)LJXUH
)LJXUH
)LJXUH
)LJXUH
)LJXUH