Furuno 1834C-BB Manual Do Utilizador

2. RADAR OPERATION 

1. Press the EBL/VRM key to display the EBL/VRM soft keys. 
2.  Press the B: VRM1 ON (dotted ring VRM) or E: VRM2 ON (dashed ring VRM) soft key 

to select the desired VRM. The selected VRM’s indication, at the bottom of the screen, 
is highlighted.   

3. Rotate the ENTER knob then place the VRM on the inside edge of a radar target. Read 

the VRM indication to find range to the target. 

VRM1

(Dotted line)

VRM2

(Dashed line)

VRM1 range

Active VRM is highlighted. 

°

°

VRM2 range

°

EBL1
   ON

VRM1
   ON

EBL2
   ON

OFFSET

4.  You may hide the EBL/VRM soft keys by pressing the EBL/VRM key. 
 

Press appropriate VRM soft key (B or E key), then press 

the CLEAR key. The VRM is erased and its indication becomes blank. 
 
Erasing EBL/VRM data boxes: 

Press the EBL or VRM soft key (B or E key) associated 

with the EBL/VRM data box you wish to erase. Press the CLEAR key once or twice to 
erase the data box. 
 
Hiding EBL/VRM data boxes: 

Press the E: ZOOM & D. BOX and D: D. BOX ON/OFF soft 

keys to show or hide the EBL/VRM data boxes. 
 
Moving EBL/VRM data boxes: 

When an EBL/VRM data box is obscuring a target you 

want to see, you can move it to another location as shown below. This cannot be done 
when the EBL/VRM soft keys are shown. 
 
1. Press the EBL/VRM key to turn off the EBL/VRM soft keys. 
2. Using the Trackball, place the cursor inside the data box you wish to move. As the 

cursor enters the box it changes to a “hand.” Push the ENTER knob, and the hand 
changes to a fist, meaning the box is correctly selected. 

3. Use the Trackball to move the data box to the location desired, then push the ENTER 

knob.