Furuno 1834C-BB Manual Do Utilizador

3. PLOTTER OPERATION 

Your ship’s track is plotted on the screen using navigation data fed from position-fixing 
equipment. This section shows you what you can do with track, from turning it on or off to 
changing its plotting interval. In the default setting, own ship’s track is turned on and is 
displayed in red. 
 

1. Press the MENU key followed by the A: CHART SETUP and B: TRACKS & MARKS 

CONTROL soft keys to open the TRACK CONTROL menu. 

OWN SHIP TRACK DISP

ON

OWN SHIP TRACK COLOR

RED

TARGET TRACK DISPLAY

ON

TARGET TRACK COLOR

WHITE

INTERVAL

TIME

TIME INTERVAL

00m10s

DISTANCE INTERVAL

00.10nm

MEMORY(TRACK & MARK) 2000 POINTS
    (MARK MEMORY)

(6000)POINTS

SHIP'S TRACK STATUS

TRACKING
TRACK: 1234/2000
MARK  :       9/6000

RETURN

EDIT

MARK
   SETUP

ERASE
T & M

TRACK

2. Use the Trackball to select OWN SHIP TRACK DISP. 
3.  Press the A: EDIT soft key to show the track display window. 
4. Use the Trackball to select ON (default setting) or OFF as appropriate. 
5.  Press the C: ENTER soft key.   
6. Press the MENU key to close the menu. 
 
Note:

 The number of track and mark points used appears at the SHIP’S TRACK STATUS 

window on the TRACK CONTROL menu. Using the figure above as an example, 1234 
points of track and 9 marks have been recorded. 
 
Target track 

Target track, NMEA format TTM (Tracked Target Message) data sentence, may be turned 
on or off as desired. The default setting is ON. 
 
7. Press the MENU key followed by the A: CHART SETUP and B: TRACKS & MARKS 

CONTROL soft keys to open the TRACK CONTROL menu. 

8. Use the Trackball to select TARGET TRACK DISPLAY. 
9.  Press the A: EDIT soft key to show the target track display window.