Pentax WG-10 Guia De Utilização

233

7

Se

ttin

gs

You can save battery power by setting the display to dim automatically 

when no operation is performed for a fixed time. After the power saving 

function has been activated, the display returns to the ordinary 

brightness if any button is pressed.

1

Press the 3 button in Q mode.

The [W Setting] menu appears.

When you press the 3 button in A mode, press the four-way 

controller (5) once.

2

Use the four-way controller (23) to select [Power Saving].

3

Press the four-way controller (5).

A pull-down menu appears.

4

Use the four-way controller 

(23) to select the time until 

the camera enters power 

saving mode.

Choose from [2min.], [1min.], [30sec.], 

[15sec.], [5sec.] or [Off].

5

Press the 4 button.

The setting is saved.

Using the Power Saving Function

•

Power Saving does not function in the following situations:
-

While taking pictures in the continuous shooting mode

-

In the playback mode

-

During movie recording

-

While the camera is connected to a computer

-

When using the AC adapter

-

While a menu is being displayed

-

In the   (Digital Microscope) mode

•

When no operation is performed after the camera is turned on, Power 

Saving is activated only after 15 seconds elapse even if [5sec.] is set.

WG10_OPM_ENG.book  Page 233  Friday, February 1, 2013  5:30 PM