Pentax WG-10 Guia De Utilização

237

7

Se

ttin

gs

Pixel mapping is a function for mapping out and correcting for defective 

pixels in the CCD sensor. Run the Pixel Mapping function if image dots 

always seem to be defective in the same place.

1

Press the 3 button in A mode, and then press 

the four-way controller (5) once.

The [W Setting] menu appears.

2

Use the four-way controller (23) to select [Pixel Mapping].

3

Press the four-way controller (5).

The [Pixel Mapping] screen appears.

4

Use the four-way controller (2) 

to select [Pixel Mapping].

5

Press the 4 button.

Defective pixels are mapped and corrected.

Perform Pixel Mapping

•

Pixel Mapping is only available in A mode. Pixel mapping cannot 

be selected even if the [W Setting] menu is displayed by pressing 

the 3 button in Q mode.

•

When executing Pixel Mapping from Q mode, press the Q button 

once to enter A mode. Then press the 3 button and the four-

way controller (5) to display the [W Setting] menu and select Pixel 

Mapping.

•

Pixel Mapping cannot be selected in Voice Recording mode.

When the battery level is low, [Not enough battery power remaining to 

activate Pixel Mapping] is displayed on the monitor. Use the AC adapter 

kit K-AC117 (optional) or use a battery with ample capacity remaining.

WG10_OPM_ENG.book  Page 237  Friday, February 1, 2013  5:30 PM