Pentax WG-10 Guia De Utilização

Getting St

arted

Use the rechargeable lithium-ion battery D-LI92 that is provided with

the camera. Charge the battery before using it in the camera for the first

time.

Open the battery/card cover.

Press the battery/card cover lock lever in the direction shown 1,

slide the cover towards 2 and open it towards 3.

•

Do not charge batteries other than the rechargeable lithium ion D-LI92

battery using the supplied D-BC92 battery charger. Doing otherwise

may cause damage or overheating.

•

The battery has reached the end of its service life when it starts to run

down soon after being charged. Replace it with a new battery.

•

If the battery is inserted correctly but the charging indicator fails

to light, the battery may be faulty. Replace it with a new battery.

The time required to fully charge the battery is about 120 minutes (max.).

(The charging time may vary depending on the ambient temperature and

charging conditions.) The appropriate ambient temperature for charging

the battery is 0°C to 40°C (32°F to 104°F).

Installing the Battery

Battery/card cover

lock lever

Battery lock lever

Battery/card

cover

Battery

WG10_OPM_ENG.book Page 34 Friday, February 1, 2013 5:30 PM