Pentax WG-10 Guia De Utilização

40

Getting St

arted

1

Installing the SD Memory Card

This camera uses SD Memory Cards, SDHC Memory Cards or SDXC 

Memory Cards. (These cards are referred to as SD Memory Cards 

hereafter.) Captured images and sound files are saved on the SD 

Memory Card if a card is inserted in the camera. They are saved 

in the built-in memory if a card is not inserted (p.43).

• Be sure to use this camera to format (initialize) an SD Memory 

Formatting the Memory” (p.214) for instructions 

•

Make sure that the camera is turned off before inserting or removing 

the SD Memory Card.

•

Allow the camera to dry completely before changing the SD Memory 

Card. Avoid changing the card where the camera is likely to get wet 

or dirty, and make sure that your hands are dry.

•

Do not use excessive force when sliding the battery/card cover open 

and closed because the waterproof packing may peel off. If the 

packing is not in the correct position, the camera will not be waterproof.

•

The still picture storage capacity varies depending on the capacity 

of the SD Memory Card and the selected number of recorded pixels 

and quality level (p.280).

•

The power lamp blinks while the SD Memory Card is being accessed 

(data is being recorded or read).

Backing Up Data

The camera may not be able to access data in the built-in memory in the case 

of a malfunction. Use a computer or other device to back up important data 

in another location.

WG10_OPM_ENG.book  Page 40  Friday, February 1, 2013  5:30 PM