Pentax WG-10 Guia De Utilização

Página de 297
7
• Avoid storing the camera where pesticides and chemicals are handled. 
Remove the camera from its case and store it in a well-ventilated place 
to prevent the camera from becoming moldy during storage.
• Avoid using or storing the camera where it may be exposed to static 
electricity or electrical interference.
• Avoid using or storing the camera in direct sunlight or in locations where 
it may be exposed to rapid changes in temperature or to condensation.
• Periodic checks are recommended every 1 to 2 years in order to maintain 
high performance.
• The SD Memory Card is equipped with 
a write-protect switch. Setting the switch 
to LOCK prevents new data from being 
recorded on the card, the stored data from 
being deleted, and the card from being 
formatted by the camera or computer.
r
 appears on the display when the card is write-protected.
• Care should be taken when removing the SD Memory Card immediately 
after using the camera, as the card may be hot.
• Keep the battery/card cover closed and do not remove the SD Memory 
Card or turn the camera off while the data is being played back or saved 
to the card, or the camera is connected to a computer with the USB cable, 
as this may cause the data to be lost or the card to be damaged.
• Do not bend the SD Memory Card or subject it to violent impact. 
Keep it away from water and store away from high temperature.
• Do not remove the SD Memory Card during formatting as this may damage 
the card and render it unusable.
• The data on the SD Memory Card may be lost in the following 
circumstances. We do not accept any liability for data that is deleted
(1) when the SD Memory Card is mishandled by the user.
(2) when the SD Memory Card is exposed to static electricity or electrical 
interference.
(3) when the SD Memory Card has not been used for a long time.
(4) when the SD Memory Card is ejected or the batteries are removed 
while the card is being accessed.
About Storage
Others
Write-protect
switch
WG10_OPM_ENG.book  Page 7  Friday, February 1, 2013  5:30 PM