Pentax K20D Guia De Utilização

94

4

• When the sensitivity is set to [AUTO] and exposure mode is set to a (Hyper-

manual) mode, the sensitivity is the lowest sensitivity set in “Setting the 
Range of Automatic Correction in AUTO” (p.78).

• The viewfinder indicator blinks when the difference from appropriate 

exposure is over ±3.0.

• Set the shutter speed and aperture values in increments of 1/2 EV or 1/3 EV. 

Set in [2. EV Steps] in the [A Custom Setting] menu. (p.101) 

• Set the aperture to the s position while 

holding down the auto-lock button when 
using a lens with an aperture ring.

The EV bar appears in the LCD panel 
and viewfinder in a (Hyper-manual) 
mode. The appropriate exposure is set 
when V is in the middle of the EV bar. If 
it is towards –, it is underexposed. If it is 
towards +, it is overexposed. If the 
value exceeds the range of the EV bar, the “+” or “–” blinks.

EV bar

If the subject is too bright or too dark, 
“+” or “–” in the EV bar will blink in the 
viewfinder and on the LCD panel.

e_kb442.book  Page 94  Monday, February 11, 2008  3:22 PM