Pentax K-30 Guia De Utilização

242

Usi
ng

e F
las

By using two external flashes (AF540FGZ or AF360FGZ) or using the

built-in flash with one or more external flashes, you can shoot in P-TTL

flash mode without connecting the flash units with a cord.

First, set the channel for the external flash unit.

Set the channel for the external flash unit.

Remove the cover of the hot shoe, and attach the external

flash.

Turn on the camera and the external flash, and press the

shutter release button halfway.

The built-in flash is set to the same channel as the external flash unit.

Using Flash in Wireless Mode

•

Set the power switch of the external flash to WIRELESS.

•

Two or more AF540FGZ/AF360FGZ external flashes are required to use the

high-speed sync flash in wireless mode. This function cannot be used in

combination with the built-in flash.

•

Set the wireless mode of the external flash not directly connected to the

camera to SLAVE.

Setting the Channel for the External Flash

Be sure to set all the flashes to the same channel. Refer to the manual of the

AF540FGZ or AF360FGZ for details on how to set the channel on the external

flash.

e_kb524_84percent.book Page 242 Friday, June 15, 2012 12:13 PM