Panasonic PTD7600E Guia De Utilização

66

RGB REALITY mode converts RGB (primary colors) input signals into component signals and achieves the high-
quality playback by motion-image-specific picture conversion process.
This mode is effective only when the signal input is applied to the RGB input signal module (ET-MD95RGB).
The appropriate mode can be selected according to the signal. (Refer to page 64)
RGB mode: For RGB signals input from a PC etc. (mostly still images)
RGB REALITY mode: For RGB signals input from a scan converter etc. (mostly motion images)

The following are the signals that can be converted into RGB REALITY mode:

Signal name

480i

fH(kHz)/fV(Hz)

RGB mode

RGB REALITY mode

Remarks

15.73/60

576i

15.63/50

480p

31.47/60

720/60p

45.00/60

1035/60i

33.75/60

1080/60i

33.75/60

1080/24p

27.00/24

1080/50i

28.12/50

1080/30p

33.75/30

1080/25p

28.12/25

1080/24sF

27.00/48

Others

RGB mode only

: Supported (Factory default)

: Supported (To use the signal in the mode with 

, select the signal with the SYSTEM

SELECTOR button and register it.)

: Use the signal in the RGB REALITY mode because the signal may not be supported depending

on the state of the signal.

: Not supported

• The automatic picture adjustment (page 40) and the adjustment of the input resolution (page 59)

cannot be performed because the optimal adjustment value is preset in the RGB REALITY mode.

• The projector's adjustment functions in the RGB REALITY mode are the same as those for the YP

B

P

R

(or YC

b

C

r

) input.