Panasonic CZRWSU2N Guia De Utilização

Página de 224
3. Installing Batteries
10
(EN)
1. Remove the cover.
2. Insert two LR03 size batteries.
  Put the batteries in with the polarity [+/–] 
as shown in the fi gure.
3. Gently insert one end of an 
unfolded paper clip (or a similar 
object that can fi t) into the Reset 
hole and press the Reset button 
inside the hole, then put the cover 
back on.
Notes
•  Change the batteries when the display of the 
remote controller gets weak, or if it will not work 
unless close to the receiver.
  (Alkaline batteries generally last about one year.)
•  When changing batteries, always use two fresh batteries of the same make.
•  If the remote controller will not be used for a long period of time, remove the batteries.
•  Please dispose of batteries appropriately.
•  After changing the batteries, follow the procedures on the next page to reset the 
current time.
How to Remove Batteries
1. Remove the cover.
2. Press the battery toward the 
negative end and lift it out by 
its positive end. (See the 
fi gure on the right.)
3. Remove the other battery in 
the same way.
Note
•  Dispose of the used batteries at the designated location in compliance with the 
applicable local ordinances.
 Warning
•  Do not swallow the battery.
•  After removing the battery from remote controller, keep it out of the reach of children.
  The battery can cause death by suffocation if swallowed.
•  When inserting the battery, make sure the polarities (+ and -) are correct.
Reset hole
Cover
00_OI_303000.indb   10
00_OI_303000.indb   10
2015/02/20   16:23:02
2015/02/20   16:23:02