Panasonic KXFLM673HX Guia De Utilização
7. Fax
44
The unit receives the fax automatically without
ringing.
When a fax calling tone is not detected
A The unit will ring 3 times. You may answer the call.
ringing.
When a fax calling tone is not detected
A The unit will ring 3 times. You may answer the call.
L
To answer using another telephone (
1)
connected to the [EXT] jack of this unit (
2), lift
the handset, then press {Stop} on the unit to talk
to the other party.
to the other party.
L
To answer using the handset of the unit or
another telephone (
another telephone (
3) connected to the same
telephone line as this unit (
4), lift the handset
and talk to the other party.
L
The number of rings is determined by the “Silent
fax recognition ring setting” (feature #436 on
page 55).
fax recognition ring setting” (feature #436 on
page 55).
L
Callers will hear a ring back tone different from
the one generated by the telephone company.
the one generated by the telephone company.
B If you do not answer the call, the unit will activate
the fax function.
the fax function.
L
Some fax machines do not generate fax calling
tones when sending faxes, therefore the unit will
try to receive a fax even if no fax calling tone is
detected.
tones when sending faxes, therefore the unit will
try to receive a fax even if no fax calling tone is
detected.
7.8 Using the unit with an
answering machine
answering machine
7.8.1 Setting up the unit and an answering
machine
machine
1
Connect the answering machine (
1).
L
Answering machine is not supplied.
L
Remove the protection sheet (
2) if attached
2
Set the number of rings on the answering machine to
4 rings or less.
4 rings or less.
L
This will allow the answering machine to answer
the call first.
the call first.
3
Record a greeting message on the answering
machine.
machine.
L
We recommend you record a message up to 10
seconds long, and not to pause for more than 4
seconds during the message. Otherwise, both
machines will not function correctly.
seconds long, and not to pause for more than 4
seconds during the message. Otherwise, both
machines will not function correctly.
4
Activate the answering machine.
5
Set the unit to the desired receiving mode (page 42).
L
If you set to FAX ONLY mode, change the ring
setting in FAX ONLY mode to more than 4
(feature #210 on page 51).
setting in FAX ONLY mode to more than 4
(feature #210 on page 51).
6
Make sure each of the following are unique:
–
–
the remote access code of the answering
machine
machine
–
the fax activation code (feature #434 on page 55)
Note:
L
If the call is a phone call, the answering machine will
record voice messages.
If a fax calling tone is detected, the fax machine will
receive a fax automatically.
record voice messages.
If a fax calling tone is detected, the fax machine will
receive a fax automatically.
1
2
3
4
1
2