Panasonic KXTGM430 Guia De Utilização
Setting the message indicator
You can enable and disable the message indicator for each type of
status.
– “Incoming call” (default: On)
– “New message” (default: On)
– “New VM” (default: On)
– “Missed call” (default: Off)
– “Alarm” (default: On) (handset only)
– “Application alert” (default: On)
This feature can be set for each unit.
status.
– “Incoming call” (default: On)
– “New message” (default: On)
– “New VM” (default: On)
– “Missed call” (default: Off)
– “Alarm” (default: On) (handset only)
– “Application alert” (default: On)
This feature can be set for each unit.
1
For handset: MMENUN#278
For base unit (using a handset): MMENUN#*278
For base unit (using a handset): MMENUN#*278
2
MbN: Select the desired setting and press MSELECTN.
R “
” is displayed next to enabled items.
R To disable an item, select it and press MSELECTN again. “
” disappears.
3
MSAVEN a MOFFN
Note:
R If the message indicator flashes when the handset is not placed on the base unit, the handset
R If the message indicator flashes when the handset is not placed on the base unit, the handset
consumes battery power faster than usual.
Slow talk
This feature slows down the speed of the other party’s voice, which
can make it easier to understand phone conversations, answering
system messages, etc. Slow talk is available in the following
situations.
– When talking on outside calls (including conferences)
– When playing answering system messages
– When screening calls
can make it easier to understand phone conversations, answering
system messages, etc. Slow talk is available in the following
situations.
– When talking on outside calls (including conferences)
– When playing answering system messages
– When screening calls
Handset
To activate this feature or change the current setting, press
MSLOWN repeatedly.
MSLOWN repeatedly.
For assistance, please visit http://shop.panasonic.com/support
31
Accessibility
TGM43x(en)_0426_ver031.pdf 31
2016/04/26 10:55:18