Panasonic SC-EN17 Guia De Utilização

Set the unit up on an even surface away from direct sunlight, high

temperatures, high humidity, and excessive vibration. These conditions can

damage the cabinet and other components, thereby shortening the unit’s

service life.

Do not place heavy items on the unit.

Do not use high voltage power sources. This can overload the unit and

cause a fire.

Do not use a DC power source. Check the source carefully when setting

the unit up on a ship or other place where DC is used.

Ensure the AC mains lead is connected correctly and not damaged. Poor

connection and lead damage can cause fire or electric shock. Do not pull,

bend, or place heavy items on the lead.

Grasp the plug firmly when unplugging the lead. Pulling the AC mains lead

can cause electric shock.

Do not handle the plug with wet hands. This can cause electric shock.

Do not let metal objects fall inside the unit. This can cause electric shock

or malfunction.

Do not let liquids get into the unit. This can cause electric shock or

malfunction. If this occurs, immediately disconnect the unit from the power

supply and contact your dealer.

Do not spray insecticides onto or into the unit. They contain flammable

gases which can ignite if sprayed into the unit.

Do not attempt to repair this unit by yourself. If sound is interrupted,

indicators fail to light, smoke appears, or any other problem that is not

covered in these instructions occurs, disconnect the AC mains lead and

contact your dealer or an authorized service center. Electric shock or

damage to the unit can occur if the unit is repaired, disassembled or

reconstructed by unqualified persons.

Extend operating life by disconnecting the unit from the power source if it

is not to be used for a long time.

(For United Kingdom)

For your safety, please read the following text carefully.

This appliance is supplied with a moulded three pin mains plug for your
safety and convenience.
A 5-ampere fuse is fitted in this plug.
Should the fuse need to be replaced please ensure that the replacement
fuse has a rating of 5-ampere and that it is approved by ASTA or BSI to
BS1362.
Check for the ASTA mark 

 

or the BSI mark 

 

on the body of the fuse.

If the plug contains a removable fuse cover you must ensure that it is refitted
when the fuse is replaced.
If you lose the fuse cover the plug must not be used until a replacement
cover is obtained.
A replacement fuse cover can be purchased from your local dealer.

If a new plug is to be fitted please observe the wiring code as stated below.
If in any doubt please consult a qualified electrician.

The wires in this mains lead are coloured in accordance with the following
code:
Blue: Neutral, Brown: Live.
As these colours may not correspond with the coloured markings identifying
the terminals in your plug, proceed as follows:
The wire which is coloured Blue must be connected to the terminal which is
marked with the letter N or coloured Black or Blue.
The wire which is coloured Brown must be connected to the terminal which
is marked with the letter L or coloured Brown or Red.

 

Remove the connector cover.

The location of the fuse differ according to the type of AC mains plug (figures
A and B). Confirm the AC mains plug fitted and follow the instructions below.
Illustrations may differ from actual AC mains plug. 

1. Open the fuse cover with a screwdriver.

gSales and Support Information

• For UK customers: 

• For Republic of Ireland customers: 

• Visit our website for product information 

• E-mail: 

• Order accessory and consumable items for your product with ease

and confidence by phoning our Customer Care Centre Monday –

Friday 9:00am – 5:30pm (Excluding public holidays).

• Or go on line through our Internet Accessory ordering application at

www.panasonic.co.uk.

• Most major credit and debit cards accepted.

• All enquiries transactions and distribution facilities are provided

directly by Panasonic UK Ltd.

• It couldn’t be simpler!

• Also available through our Internet is direct shopping for a wide

range of finished products, take a browse on our website for further

details.

CLASS 1

LASER PRODUCT

(Back of product)

IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE
SOCKET OUTLET IN YOUR HOME THEN THE FUSE SHOULD
BE REMOVED AND THE PLUG CUT OFF AND DISPOSED OF
SAFELY.
THERE IS A DANGER OF SEVERE ELECTRICAL SHOCK IF
THE CUT OFF PLUG IS INSERTED INTO ANY 13-AMPERE
SOCKET.

Fuse cover

Fuse
(5 ampere)

Fuse
(5 ampere)

2. Replace the fuse and close or attach the fuse cover.

Inside of product
Tuotteen sisällä
Produktets innside