Panasonic NVVP31EE Guia De Utilização

1] (PLAY). 

≥Condensation has formed: Wait 1 to 2 hours for it to evaporate.
≥This unit cannot play discs other than those listed in these operating instructions.
≥This unit cannot play DVD-Video with a region number other than “4”, “ALL” or multiple 

region numbers including “4”.

≥The disc may be dirty and may require cleaning.
≥Ensure that the disc is installed with the label of the side to be played facing upwards.
≥Check that the DVD-RAM has something recorded on it.

≥This function depends on software availability.

≥This function depends on software availability.
≥Subtitles are cleared from the TV. Display the subtitles.
≥Subtitle’s position is wrong. Adjust the position.

≥This function depends on software availability.

≥This function depends on software availability. Even if a disc has a number of angles 

recorded, these angles may be recorded for specific scenes only.

≥Folders deeper than the eighth layer are displayed as if there were in the eighth layer.

≥While stopped and “DVD” is the source, press and hold [REW6] (VHS), [PLAY1] 

(DVD) and [OPEN/CLOSE

<] on the unit for about 3 seconds until “Initialized” disappears 

from the TV. Turn the unit off and on again.
All settings will return to the default values.

≥Go to “Video” in the SETUP menu, and select “Enable (NTSC Disc Only)” in “Progressive 

Out (Component)”.

≥Reload the disc for the setting to be effective. Press [OPEN/CLOSE<] to open the tray, 

then press [ 

1](PLAY) to start play.

≥Check the connection.
≥Make sure the TV is on.
≥Ensure the video exclusive channel (or AV input) is selected.

Also adjust the channel on the TV. (Also refer to the instructions for the TV.)

≥Go to “Video” in the SETUP menu, and change “TV Aspect” to suit your TV.
≥Change the aspect of TV to the correct one.

If your TV cannot change the aspect when input is progressive,
try changing “4:3 Aspect” with the on-screen menu icons. If the problem still persists, press 
[PROGRESSIVE] to cancel the progressive output.

≥Turn off the zooming feature of your TV if you are using Variable Zoom.
≥Ensure that the unit is connected directly to the TV, and is not connected through an A/V 

selector or other equipment.

≥Connect to the component video input terminals on a 480P compatible TV (Video will not 

be displayed correctly if connected to an incompatible TV).

13, 39

≥Mobile telephone chargers can cause some disturbance.
≥The TV antenna cable is too close to the unit. Separate the antenna cable of the TV from 

the unit. 

≥The unit and TV are using different video systems.

Use a multi-system or PAL TV.

≥Adjust the tracking.
≥The TV has not been tuned to the unit. Tune the TV to the unit.
≥Make sure the TV’s input setting is correct.
≥The video heads are dirty: clean them with a head-cleaning cassette.
≥The video heads are worn: consult your dealer (for NV-VP31GL only, consult Panasonic 

Customer Care Centre for advice on 132600). 

≥The tape is old or damaged.
≥You cannot correctly play tapes recorded with other systems.

Go to “OPTION” and change “NTSC PB SELECT” to suit the recording.

15
11

≥You are playing a blank or poor quality part of the tape. 
≥You can damage the unit if you play dirty or damaged tapes and this can cause the blue 

back to appear. Consult your dealer.

≥Adjust the vertical hold.
≥Adjust the TVs vertical hold. Refer to your TV’s operating instructions. 

VP31GL.book  45 ページ   ２ ０ ０ ３ 年 ７ 月 ３ ０ 日 　 水曜日 　 午後 ８ 時 ２ ２ 分