Panasonic HRS100400E Guia De Utilização
4
SQT1200
• To prevent dust and other particles from accumulating on
or entering the lens, attach the lens rear cap when the lens
is not in use.
is not in use.
• To protect the lens contact points 1, do not place the lens
with its mount surface facing down. In addition, do not
allow the lens contact points to become dirty.
allow the lens contact points to become dirty.
∫
About Condensation (Fogging of the Lens)
• Condensation occurs when there are differences in
temperature and humidity as described below.
Condensation can cause the lens to become dirty and
lead to mold and malfunctioning, so exercise caution in the
following situations:
– When the camera is brought indoors from outside during
Condensation can cause the lens to become dirty and
lead to mold and malfunctioning, so exercise caution in the
following situations:
– When the camera is brought indoors from outside during
cold weather
– When the camera is brought into an air-conditioned car
– When cold air from an air conditioner is directly blown
– When cold air from an air conditioner is directly blown
onto the lens
– In humid places
• If condensation occurs, turn the power off and leave it for about
two hours. Once the camera acclimatizes to the surrounding
temperature the condensation will go away naturally.
temperature the condensation will go away naturally.
Supplied Accessories
Product numbers correct as of January 2016. These may
be subject to change.
be subject to change.
1 Lens Pouch
2 Lens Hood
3 Lens Cap
4 Lens Rear Cap
5 External tripod mount
2 Lens Hood
3 Lens Cap
4 Lens Rear Cap
5 External tripod mount
• The lens rear cap and lens cap are attached to the
interchangeable lens at the time of purchase.
SFC0360
SYQ0679
2
1
5
3
4
SYF0074
VFC4605
SYQ0680
SQT1200_ENG.fm 4 ページ ２０１６年５月２７日 金曜日 午前９時２８分