Panasonic DMCSZ1EG Guia De Utilização
- 45 -
Osnovne funkcije
[Demo Mode]
(Prikaz
funkcija)
Pokazuje količinu vibracija koju je fotoaparat uočio. ([Stabilizer
Demo.])
Prikaz značajki fotoaparata na zaslonu kao „Slide Show”
(Prikaz u nizu).
([Auto Demo])
[Stabilizer Demo.] (Prikaz stabilizatora):
[Stabilizer Demo.] (Prikaz stabilizatora):
Količina vibracija
Količina vibracija nakon podešavanja
[Auto Demo] (Automatski prikaz
funkcija):
[ON]
[OFF]
• Funkcija stabilizatora uključuje se i isključuje svaki put kada tijekom prikaza [Stabilizer
Demo.] pritisnete [MENU/SET].
• Tijekom reprodukcije funkcija [Stabilizer Demo.] ne može se prikazivati.
• [Stabilizer Demo.] je približna vrijednost.
• Funkcija [AUTO DEMO] ne prikazuje se na TV prijamniku.
Basic
- 52 -
•
Use a battery with sufficient battery power when formatting. Do not turn the camera off during
formatting.
•
If a card has been inserted, only the card is formatted. To format the built-in memory, remove
the card.
•
If the card has been formatted on a PC or other equipment, format it on the camera again.
•
It may take longer to format the built-in memory than the card.
•
If you cannot format, contact the dealer or your nearest Service Centre.
•
If you set a different language by mistake, select [~] from the menu icons to set the desired
language.
•
The Stabiliser function is switched between [On] and [Off] every time [MENU/SET] is pressed
during the [Stabilizer Demo.].
•
[Stabilizer Demo.] is an approximation.
•
[Auto Demo] is not output to the television.
[Version Disp.]
It is possible to check which version of firmware is on the camera.
[Format]
The built-in memory or card is formatted.
Formatting
irretrievably deletes all the data so check the data carefully
before formatting.
~
[Language]
Set the language displayed on the screen.
[Demo Mode]
Displays the amount of jitter the camera has detected. ([Stabilizer
Demo.])
The camera’s features are displayed as slide shows.
([Auto Demo])
[Stabilizer Demo.]:
[Stabilizer Demo.]:
A
Amount of jitter
B
Amount of jitter after correction
[Auto Demo]:
[ON]
[OFF]
DEMO
A B
Basic
- 52 -
•
Use a battery with sufficient battery power when formatting. Do not turn the camera off during
formatting.
•
If a card has been inserted, only the card is formatted. To format the built-in memory, remove
the card.
•
If the card has been formatted on a PC or other equipment, format it on the camera again.
•
It may take longer to format the built-in memory than the card.
•
If you cannot format, contact the dealer or your nearest Service Centre.
•
If you set a different language by mistake, select [~] from the menu icons to set the desired
language.
•
The Stabiliser function is switched between [On] and [Off] every time [MENU/SET] is pressed
during the [Stabilizer Demo.].
•
[Stabilizer Demo.] is an approximation.
•
[Auto Demo] is not output to the television.
[Version Disp.]
It is possible to check which version of firmware is on the camera.
[Format]
The built-in memory or card is formatted.
Formatting
irretrievably deletes all the data so check the data carefully
before formatting.
~
[Language]
Set the language displayed on the screen.
[Demo Mode]
Displays the amount of jitter the camera has detected. ([Stabilizer
Demo.])
The camera’s features are displayed as slide shows.
([Auto Demo])
[Stabilizer Demo.]:
[Stabilizer Demo.]:
A
Amount of jitter
B
Amount of jitter after correction
[Auto Demo]:
[ON]
[OFF]
DEMO
A B
Basic
- 52 -
•
Use a battery with sufficient battery power when formatting. Do not turn the camera off during
formatting.
•
If a card has been inserted, only the card is formatted. To format the built-in memory, remove
the card.
•
If the card has been formatted on a PC or other equipment, format it on the camera again.
•
It may take longer to format the built-in memory than the card.
•
If you cannot format, contact the dealer or your nearest Service Centre.
•
If you set a different language by mistake, select [~] from the menu icons to set the desired
language.
•
The Stabiliser function is switched between [On] and [Off] every time [MENU/SET] is pressed
during the [Stabilizer Demo.].
•
[Stabilizer Demo.] is an approximation.
•
[Auto Demo] is not output to the television.
[Version Disp.]
It is possible to check which version of firmware is on the camera.
[Format]
The built-in memory or card is formatted.
Formatting
irretrievably deletes all the data so check the data carefully
before formatting.
~
[Language]
Set the language displayed on the screen.
[Demo Mode]
Displays the amount of jitter the camera has detected. ([Stabilizer
Demo.])
The camera’s features are displayed as slide shows.
([Auto Demo])
[Stabilizer Demo.]:
[Stabilizer Demo.]:
A
Amount of jitter
B
Amount of jitter after correction
[Auto Demo]:
[ON]
[OFF]
DEMO
A B