Panasonic KX-TG2632 Guia De Utilização
–
5
–
Quick troubleshooting
Lift up the handset from the base unit
or charger.
Press {C} (TALK) at the handset,
then check if the display shows
“Talk”.
or charger.
Press {C} (TALK) at the handset,
then check if the display shows
“Talk”.
Press {s} (SP-PHONE),
then check if the dial
tone is heard from the
speaker on the back.
then check if the dial
tone is heard from the
speaker on the back.
No dial tone
Dial tone is heard.
“No link to base.
Move closer to
base, try again.
Move closer to
base, try again.
”
is displayed.
“Talk” is
displayed.
displayed.
Check the telephone
cord is properly
connected to both
the base unit and
telephone jack on
the wall.
cord is properly
connected to both
the base unit and
telephone jack on
the wall.
Try remedy for 1
on previous page.
on previous page.
Your telephone may
need service when
only back speaker
provides a dial tone.
need service when
only back speaker
provides a dial tone.
2 No dial tone is heard from handset.
Your telephone may need service.
Please visit http://www.panasonic.com/phonehelp for further
troubleshooting.
Please visit http://www.panasonic.com/phonehelp for further
troubleshooting.
Still no dial tone
{C}
Talk
KFlash
{s}
No link to base.
Move closer to
base, try again.
Move closer to
base, try again.
TG2631_2632_QG(e).fm Page 5 Monday, December 12, 2005 2:05 PM