Panasonic DP-C322 Guia De Utilização

62

U1

Front Cover is open.

U4

Finisher is pulled out.

U6

ADU Cover and/or Feed Cover 1 and/or Right
Side Cover is open.

U7

Feed Cover 2 & Option Feed Cover are open.

U8

Transport Cover is open.
(When optional Paper Transport Unit is
installed)

U11

Paper remains in the Finisher Bin.
(When optional Finisher is installed)

U12

Finisher Top Cover and/or Staple Cover is
open.
(When optional Finisher is installed)

U13*

Toner level is Low or has run out.
(See pages 14, 66  and 67)

U14*

Toner Waste Container is full.
(See pages 14, 70  and 71)

U15

Toner Waste Container is not installed.
(See pages 70 and 71)

U20

ADF Cover is open.

U21

ADF is open while scanning from ADF.

U25

Toner is hardened. Shake Toner Cartridge
well. (See page 66)

U28

OPC Drum Unit is not installed.
(See pages 68 and 69)

U29

OPC Drum Unit requires replacement.
(See pages 68 and 69)

E Codes: Call the authorized Panasonic dealer when machine Error Code (E Codes) appear on the Touch Panel Display.

Error Location Indicator
(Ex: Front Cover is opened.)

●

When a user error occurs, the location and the procedures for handling
the user error are displayed frame by frame on the Touch Panel Display.
Check the location and handle the user error according to displayed
pictures and this manual. (See pages 66-71)

Ex: Toner Waste Container is

almost full.

Ex: Toner Waste Container is full.

●

Select "Close" to continue
the current job temporarily.

●

Machine will stop. Replace the
Toner Waste Container.

A. Blinking Maintenance and Toner/Toner Waste Container Indicators

The machine will complete the current job, and stop operating. To continue using the machine temporarily while waiting for a replacement
toner/container, press any key. (Ex:For Toner Waste Container, approximately 300 additional copies can be made)

B. Steady Maintenance and Toner/Toner Waste Container Indicators

The machine stops and will not allow further operation until the Toner Waste Container is replaced.