Panasonic KXHNS107 Guia De Utilização
1
Make sure that the front cover and
the mounting adaptor are firmly
attached to the sensor.
the mounting adaptor are firmly
attached to the sensor.
2
Affix the double-sided tape to the
mounting adaptor.
R Make sure the tape covers the
mounting adaptor.
R Make sure the tape covers the
screw holes on the mounting
adaptor.
adaptor.
3
Attach the sensor to the inside of
the garage door.
R Make sure the mounting
the garage door.
R Make sure the mounting
adaptor release lever is facing
down when the garage door is
closed.
down when the garage door is
closed.
R Press firmly to ensure solid
adhesion to the installation
surface.
surface.
Removing when secured with
double-sided tape
double-sided tape
1
Tie a piece of thread to two sticks,
screwdrivers, etc.
screwdrivers, etc.
2
Pull the thread tight and use it to
cut the double-sided tape, and
then remove any excess tape (A).
cut the double-sided tape, and
then remove any excess tape (A).
A
14
For assistance, please visit http://shop.panasonic.com/support
Setup
HNS107_(en_en)_0120_ver.101.pdf 14
2017/01/20 21:11:39