Panasonic TH-42PH20ER Guia De Utilização
H-Freq.
V-Freq.
kHz
Hz
63.98
60.02
Signal Format
1280×1024/60
Sync
Signal
[ RGB ]
Cinema reality
XGA Mode
XGA Mode
Auto
Off
Auto
H-Freq.
Dot Clock Freq.
kHz
MHz
63.98
108.0
V-Freq.
Hz
60.02
Signal Format
1280×1024/60
42
This function operates only during input from PC IN terminal.
Select Signal from the “Setup” menu during RGB or Component input signal.
Select Signal from the “Setup” menu during RGB or Component input signal.
Setting RGB sync signal
Confi rm that the input is set to RGB input (this setting is valid only for RGB input signal).
Auto: The H and V sync or synchronized signal is automatically selected. If both input, it is selected the H and V sync.
on G: Uses a synchronized signal on the Video G signal, which is input from the G connector.
VBS: Uses a synchronized signal of Composite Sync input, which is input from the HD connector.
Setting Component sync signal
Confi rm that the input is set to Component input (this setting is valid only for Component input signal).
Auto: The H and V sync or synchronized signal is automatically selected. If both input, it is selected the H and V sync.
on Y: Uses a synchronized signal on the Video Y signal, which is input from the Y connector.
Note:
Accepts only RGB signals from COMPONENT/RGB IN terminal with “Sync on G”
Accepts only RGB signals from COMPONENT/RGB IN terminal with “Sync on G”
Sync
Setup for Input Signals
Press to select the “Sync”.
Press to adjust.
Displays the frequency and the type of the current input signal.
This display is valid only for Component / RGB / PC and Digital input signal.
Display range:
Display range:
Horizontal 15 - 110 kHz
Vertical 48 - 120 Hz
Vertical 48 - 120 Hz
The dot clock frequency is displayed during digital signal input.
Input signal display