Panasonic cu-c95kh Guia De Utilização
25
HELPFUL INFORMATION
Auto Restart Control
•
If power is resumed after a power failure, the operation will restart automatically
after 3 - 5
after 3 - 5
1
/2 minutes.
•
Operation will be automatically restart under the previous operation mode and
airflow direction when power is resumed as the operation is not stopped by remote
control.
airflow direction when power is resumed as the operation is not stopped by remote
control.
•
•
•
Timer Setting
•
When power failure occurs, the timer setting is cancelled. Once power is
resumed, reset the timer.
resumed, reset the timer.
•
POWER FAILURE
Auto Operation Button
POWER
ECONOMY
POWERFUL
SLEEP
TIMER
Thunder and Lightning
•
This air conditioner is equipped with a built-in surge
protective device. However, in order to further protect
your air conditioner from being damaged by abnormally
strong lightning activity, you may switch off the main
power supply and unplug from power socket.
protective device. However, in order to further protect
your air conditioner from being damaged by abnormally
strong lightning activity, you may switch off the main
power supply and unplug from power socket.
•
■
Automatic Operation
•
•
If the remote control fails to function or misplaced, press Auto Operation button
for Automatic operation.
for Automatic operation.
•
The Automatic operation will be activated immediately once the Auto operation
button is pressed. However, temperature cannot be adjusted in this operation.
button is pressed. However, temperature cannot be adjusted in this operation.
•
The power LED on the indoor unit blinks until the operation mode is selected
automatically.
automatically.
•
To cancel this operation, press once more.
■
•
•
•
•
•
•
■
Remote Control Signal Receiving Sound
•
•
To switch off the beep (Signal Receiving Sound), press this Auto Operation
button for 10 seconds continuously or longer.
“Beep”, “beep” sound will be heard at the tenth seconds.
Note: “Beep” sound will be heard at the fifth seconds; However please press
continuously until you heard “beep” , “beep” sound.
button for 10 seconds continuously or longer.
“Beep”, “beep” sound will be heard at the tenth seconds.
Note: “Beep” sound will be heard at the fifth seconds; However please press
continuously until you heard “beep” , “beep” sound.
•
Repeat this, if you want to switch on the Signal Receiving Sound.
■
•
•
*
Note: If you press this button continuously for 5 to 10 seconds, Test Run
operation will be performed. A “beep” sound will be heard at the fifth seconds, to
identify the starting of Test Run operation.
(This is for Servicing purpose only.)
operation will be performed. A “beep” sound will be heard at the fifth seconds, to
identify the starting of Test Run operation.
(This is for Servicing purpose only.)
*