Panasonic KXHNS105FX Guia De Utilização
4
Installation
Install the siren in the desired
location.
Install the siren in the desired
location.
Registering the siren
This procedure is not required for
devices that were included as part of
a bundle.
devices that were included as part of
a bundle.
Before you can use the siren, it must
be registered to the hub.
If you purchased devices separately
(i.e., not as part of a bundle), you must
register each device to the hub.
be registered to the hub.
If you purchased devices separately
(i.e., not as part of a bundle), you must
register each device to the hub.
You can register each device by using
the registration buttons or the [Home
Network] app.
Note:
R Before registering the siren, make
the registration buttons or the [Home
Network] app.
Note:
R Before registering the siren, make
sure the AC adaptors of the hub and
siren are connected and each
device is powered.
siren are connected and each
device is powered.
Using registration buttons
1
1
Hub:
Press and hold M
Press and hold M
OTHER
DEVICEN until the LED indicator
blinks slowly in green.
blinks slowly in green.
2
Siren:
Press and hold M
Press and hold M
N until the
the hub sounds one long beep.
Note:
R To cancel without registering the
R To cancel without registering the
siren, press M
N on the hub and
on the siren again.
R If registration fails, the hub sounds
several short beeps.
Using the app
When you register the siren by using
the [Home Network] app, you can
assign a name to your devices and
group them by location.
For more information, refer to the
User’s Guide (page 14).
the [Home Network] app, you can
assign a name to your devices and
group them by location.
For more information, refer to the
User’s Guide (page 14).
9
Setup