Panasonic KXFLB813FX Guia De Utilização
1. Introduction and Installation
15
Caution:
L
To prevent injuries, be careful not to
put your hands under the top cover.
put your hands under the top cover.
Toner save feature
If you want to reduce toner consumption, set the
toner save setting to ON (feature #482 on page
63). The toner cartridge will last approximately
40 % longer. This feature may lower the print
quality.
toner save setting to ON (feature #482 on page
63). The toner cartridge will last approximately
40 % longer. This feature may lower the print
quality.
1.6 Document tray
Insert the document tray (
1) into the slot (2) on
the unit.
1.7 Output tray
KX-FLB813 has 2 pieces of output tray and KX-
FLB803 has 1 output tray pre-installed.
FLB803 has 1 output tray pre-installed.
Note:
L
Do not place the unit in an area where the
output tray may be easily bumped into.
output tray may be easily bumped into.
1.7.1 For KX-FLB813 users
As the default setting, printed paper is stacked
on the output tray as follows.
–
on the output tray as follows.
–
Upper output tray (“#1”): Printed document
by using the computer and copied document.
by using the computer and copied document.
–
Lower output tray (“#2”): Received fax
document.
document.
L
You can change the output tray setting for
faxing (feature #441 on page 67) and for
copying (feature #466 on page 68).
To change the output tray from the computer,
set the printer properties. See page 54, 59 for
details.
faxing (feature #441 on page 67) and for
copying (feature #466 on page 68).
To change the output tray from the computer,
set the printer properties. See page 54, 59 for
details.
1
Insert the output tray (
1) into the slots (2),
then push the tray down until it locks into
place.
place.
2
1
1
2
FLB803_813FX-PFQX2567ZA-en.book Page 15 Thursday, March 30, 2006 3:25 PM