Panasonic KXPRS110FX Guia De Utilização
Setting up SMS
SMS allows you to send and receive text
messages.
Important:
R To use SMS features, you must:
messages.
Important:
R To use SMS features, you must:
– subscribe to a Caller ID and/or an
appropriate service such as SMS.
– confirm that SMS is turned on.
– confirm that the correct message centre
– confirm that the correct message centre
numbers are stored.
Contact your service provider/telephone
company for details and availability.
company for details and availability.
Note:
R A total of 22 messages (at 160 characters/
R A total of 22 messages (at 160 characters/
message) can be saved. Total number may
be more than 22 if length of messages is
less than 160 characters/message.
be more than 22 if length of messages is
less than 160 characters/message.
R If the unit is connected to a PBX system,
you may not be able to use SMS features.
Turning SMS on/off
1
1
MMenuN (right soft key) #357
2
MbN: Select the desired setting. a MOKN
a M
a M
N
Storing SMS message centre
numbers
numbers
SMS message centre numbers must be
stored in order to send and receive SMS
messages.
For Czech:
The message centre numbers (used for SMS
services provided by Telefonica O2) are
preprogrammed in this unit. You can change
them if necessary.
For Slovakia:
The message centre numbers (used for SMS
service provided by Slovak Telecom - T-Com)
are preprogrammed in this unit. You can
change them if necessary.
R Contact your service provider/telephone
stored in order to send and receive SMS
messages.
For Czech:
The message centre numbers (used for SMS
services provided by Telefonica O2) are
preprogrammed in this unit. You can change
them if necessary.
For Slovakia:
The message centre numbers (used for SMS
service provided by Slovak Telecom - T-Com)
are preprogrammed in this unit. You can
change them if necessary.
R Contact your service provider/telephone
company for more information.
R If you change the unit’s region setting/reset
the base unit, the stored message centre
numbers will be deleted or changed
numbers will be deleted or changed
(page 21). In this case, store the numbers
again if necessary.
again if necessary.
1
To store “Message Centre1”:
MMenuN (right soft key) #351
To store “Message Centre2”:
MMenuN (right soft key) #352
MMenuN (right soft key) #351
To store “Message Centre2”:
MMenuN (right soft key) #352
2
Edit the number as necessary. a MOKN
a M
a M
N
Note:
R For PBX users:
R For PBX users:
– You need to add the PBX line access
number and a dialling pause to the
beginning of the Message Centre 1
number.
beginning of the Message Centre 1
number.
– If you only use the Message Centre 1
number for SMS, store the Message
Centre 1 number as is (without adding a
line access number or dialling pause) to
Message Centre 2.
Centre 1 number as is (without adding a
line access number or dialling pause) to
Message Centre 2.
Sending a message
Writing and sending a new
message
1
message
1
MMenuN (right soft key) a
a MOKN
2
MbN: “Create” a MOKN
3
Enter a message. a MOKN
R You can change the character entry
R You can change the character entry
mode by pressing MR/ECON
(page 38).
(page 38).
4
Enter the destination phone number (20
digits max.). a MOKN 2 times
R You can also set the phone number:
digits max.). a MOKN 2 times
R You can also set the phone number:
– from the redial list by pressing MTN.
– from the caller list by pressing M N.
– from the phonebook by pressing
– from the caller list by pressing M N.
– from the phonebook by pressing
MWN.
5
To save the message, select “Yes”. a
MOKN
MOKN
6
To send the message, press MOKN.
Note:
R This unit supports SMS messages of up to
R This unit supports SMS messages of up to
612 characters, however, the maximum
number of characters you can send or
number of characters you can send or
35
SMS (Short Message Service)
PRS110FX(en)_0130_ver110.pdf 35
2014/01/30 11:04:56