Panasonic DP-2310 Guia De Utilização

17

LAN Cable
(10Base-T/100Base-TX Cable)
Insert the plug until a click is heard.  
(LAN cable is not included with the product.)
Purchase a Category 5 Cable, compliant with 
EIA/TIA 568-A-5 standard.

10Base-T/100Base-TX Ethernet Hub

Ethernet LAN 
(10Base-T/100Base-TX) 
Cable (Not  included)

ACTIVITY Lamp
Blinks when there is data traffic
on the LAN.

LINK Lamp
Illuminates when connected to the LAN. 
Lamp will not turn ON if LAN cable 
is defective (contains breaks).

Plug one end of the
telephone line cable into
the telephone jack supplied 
by the telephone company 
and the other end 
into the LINE jack 
on the left side of the machine.
(Refer to the Dialling Method. 
 See page 126.)  

You can connect an
additional standard single
line telephone to the
machine. To connect the
telephone, remove the
protective tab on the TEL
jack.

After connecting all cables
and the Power Cord, turn the
Main Power Switch on the Back
and the Power Switch
on the Left Side of the machine
to the ON position.

Telephone Jack

RX

LINK

Telephone Line 
Cable Adapter