Panasonic DP-C406 Guia De Utilização
16
Chapter 2 General Settings
No. 60 - 79
No.
Parameter
Comments
Selective Item
Standard
Setting
60
Auto Tone Adjust
If the coloured image tone has deviated, set the
automatic tone adjustment.
<Procedure>
1.Execute this mode to print the calibration
automatic tone adjustment.
<Procedure>
1.Execute this mode to print the calibration
sheet.
2.Place the calibration sheet on the Platen
Glass and execute this mode again.
Stop, Start
Stop
61
Tone Adjust Reset
If “60 Auto Tone Adjust” has made the original
image tone indistinguishable, execute this mode
to reset the machine to the factory default
setting.
image tone indistinguishable, execute this mode
to reset the machine to the factory default
setting.
Stop, Start
Stop
65
Hard Disk Initialize
Set the Hard Disk Drive format/deletion.
When selecting “Deletion”, set the deletion
security level of hard disk data. During the
deletion time, the machine cannot be used.
When selecting “Deletion”, set the deletion
security level of hard disk data. During the
deletion time, the machine cannot be used.
• Stop
Deletion is not executed.
• Medium
Deletion is completed within 2 hours.
• High
Deletion is completed within 3 hours.
• Format:
Stop, Start
• Deletion:
Stop, Medium, High
Format
(Stop)
(Stop)
66
Hard Disk Error Check Set the hard disk error check.
z
Not required in the Copy mode, but needed
when installing options with advanced
functions.
when installing options with advanced
functions.
Stop, Start
Start
67
Data Deletion of HD
Set deletion security level of hard disk data for
every copy/print job.
every copy/print job.
z
Every copy/print job data is automatically
deleted after each job is completed. For
higher security, select “Medium” or “High”,
however, the deletion time increases with the
increase in security level.
deleted after each job is completed. For
higher security, select “Medium” or “High”,
however, the deletion time increases with the
increase in security level.
Basic, Medium, High
Basic
68
HD Drive Lock
Settings
Settings
Set the 32-digit HD Drive Lock password.
When the Set Hard Drive Lock is selected, the
machine requires rebooting, and the “Change
Lock Password” and “Release Drive Lock”
tasks must be carried out.
When the Set Hard Drive Lock is selected, the
machine requires rebooting, and the “Change
Lock Password” and “Release Drive Lock”
tasks must be carried out.
Set Hard Drive Lock
Set Hard
Drive Lock
Drive Lock
70
SD/USB Memory
Function
Function
Set whether to use SD Memory Card and USB
Flash Memory.
Flash Memory.
No, Yes
Yes
72
EWS Output Queue
Set whether to display the print job information
in the Output Queue on the Status screen of the
Embedded WEB.
in the Output Queue on the Status screen of the
Embedded WEB.
z
Up to 10 print jobs can be displayed.
Off, On
On
73
Config. Editor
Password
Password
Set the password for the Configuration Editor.
Up to 30 characters