Panasonic NVVP60SERIES Guia De Utilização

RQTV0114

Change the settings to suit your preferences and the environment in 
which you are using the unit. These settings are retained in the 
memory until they are changed, even if the unit is turned off.
≥Select the unit viewing channel (or the AV input) on the TV.
≥Press [VHS SELECT] (

l 8).

[1] 

[2] 

34

[3] 

¬ For “CLOCK SET” (

l 13)

The unit tunes automatically when you plug it in and turn it on for the 
first time (NV-VP60GN only, 

l 12), but you can start the process 

again if necessary.
≥Select any programme position except “A1”, “A2” or “dc”.

Auto tuning searches for TV stations from VHF minimum to UHF 
maximum and memorizes every tuned programme position. Other 
programme positions are skipped (Channel plan 

l below).

34] to select 

2 1] to start 

≥It may take up to 5 minutes 

or more to complete. 

≥When Auto Tuning is 

completed, the on-screen 
display disappears and 
programme position 1 is 
selected.

¬ To stop halfway through
Press [MENU].

¬ If the unit is not correctly tuned by Auto Tuning
Follow the procedure on the right (Manual Tuning).

 

 

34] to select 

2 1] to select the 

 

34] to select 

2 1] to select 

 

ª To select a blank 

programme, 
select “ON”. If you select 
“ON”, proceed to step 4.
≥To restore the channel 

again, select “OFF”.

≥Repeat steps 1 and 2 for 

another unoccupied 
programme positions to skip 
during the selection of the 
programme positions.

34] to select “SEARCH” and then press 

2 1] to start Manual Tuning.

≥If the desired TV station has not been tuned, press [2 1] 

again.

≥Press [MENU] and repeat steps 1-3 for each programme 

position you want to tune to a station.

≥You can also set the programme position directly by entering 

the number with the numeric buttons (

l below).

34] to select “CH” and then press 

2 1] to select the channel.

34] to select “FINE” and then press 

2 1] to obtain the best tuning condition.

≥Press [ENTER] to return the tuning to its former state.

NV-VP60GL

0-12

28-69

45-470 MHz

NV-VP60GN

1-11

21-69

44-470 MHz

The number of channels still to be 
auto tuned.

After you select “SEARCH”, press the numeric buttons to 
select the programme position.
For the 5A and 9A channels, input the following numbers.
90 for CH-5A, 91 for CH-9A. (Example for NV-VP60GL)
≥Repeat the steps above for other channels that require tuning.

VP60GL.book  Page 20  Monday, March 6, 2006  2:49 PM