Panasonic RX-ED50 Guia De Utilização
RQT5142
23
Reference
Using auxiliary equipment
You can play or record sound from other equipment through
this unit's AUX IN terminal.
Plug type: 3.5 mm stereo
this unit's AUX IN terminal.
Plug type: 3.5 mm stereo
Playback
Preparation: (when using batteries) Press [
].
Press [
] to switch to AUX mode.
Start playback on the equipment.
Recording
Do steps and as described above.
Press [
].
When this unit and the other equipment are connected to
each other, do not set input on both unit's to “AUX”. This
can cause feedback noise to occur.
each other, do not set input on both unit's to “AUX”. This
can cause feedback noise to occur.
Using headphones
(not included)
Reduce volume before connection.
Avoid listening for prolonged periods of time to prevent hear-
ing damage.
Plug type: 3.5 mm stereo
Avoid listening for prolonged periods of time to prevent hear-
ing damage.
Plug type: 3.5 mm stereo
Maintenance
If the surfaces are dirty
To clean this unit, wipe with a soft, dry cloth.
If the surfaces are extremely dirty, use a soft cloth dipped in
a soap-and-water solution or a weak detergent solution.
If the surfaces are extremely dirty, use a soft cloth dipped in
a soap-and-water solution or a weak detergent solution.
•
Never use alcohol, paint thinner, or benzine to clean this unit.
•
Before using chemically treated cloth, read the instructions
that came with the cloth carefully.
For a cleaner crisper sound
Clean the heads regularly to assure good quality playback
and recording. Use a cleaning tape (not included).
and recording. Use a cleaning tape (not included).
OUT
AUX IN
PHONES
RQT5142-B(RX-ED50 EB)
99.9.10, 10:13 PM
Page 23
Adobe PageMaker 6.0J/PPC