Panasonic UF5600 Guia De Utilização
Sending Documents
56
Wrong Transmission Prevention Function
Address Confirmation Function
Settings can be made so that transmission will always start after confirming the address.
When
When
is pushed and address confirmation has been set, a message prompting operations to
confirm the address will be displayed if the address has not been confirmed first.
This function operates if setting “125 CONFIRM STATIONS” of the system registration is “VALID”.
(See page 41)
When telephoning from an external telephone, address confirmation is not displayed.
When telephoning from an external telephone, address confirmation is not displayed.
NOTE
1. If an address has been added or removed when confirming addresses, address confirmation is
required again.
1
Operate “Manual Number Dialling“. (See page 50)
This function is also available if you send documents with
following methods:
This function is also available if you send documents with
following methods:
• One-Touch Dialling (See page 51)
• Abbreviated Dialling (see page 51)
• Group Dialling (See page 81)
• Abbreviated Dialling (see page 51)
• Group Dialling (See page 81)
CONFIRM STN
∨
∧
THEN PRESS START
2
Press
or
to confirm stations.
It is possible to add or remove addresses. To add an
address, input the address for addition. To remove an
address, display the address for removal and press
address, input the address for addition. To remove an
address, display the address for removal and press
(See Note 1).
3
The document is stored with a file number in the memory.
Following this, the telephone numbers are dialled in
sequence.
Following this, the telephone numbers are dialled in
sequence.
* DIALLING *
5551234
5551234
Start
Clear