Panasonic ICX Manual
156
ICX (International) issued June 2000
ICX-45-700
Chapter 5. Key Telephone Features
Section 700 - Operation
To transfer a call to the Primary Directory Number extension (NPDNs not called):
To set Call Forwarding All, Busy, or No Answer for a PDN from an NPDN or PNPDN:
Version 4.0 and higher
Note:
FF1-0-03: NPDN and PNPDN Call Forwarding Programming Address
Hardware Requirements
•
N/A
Considerations
•
A DN can be assigned as a member of a hunt group.
•
DNs are not available for ISDN S-Point, pilot numbers of hunting groups, Voice Mail, ACD, API
and for the Attendant group.
and for the Attendant group.
•
A PDN must be assigned to a telephone before a corresponding NPDN can be used.
•
TRS Class and ARS Routing is determined on an extension port basis regardless of the DN
accessed.
accessed.
•
Busy Override is available to the PDN conversation, but not available to the NPDN conversation.
•
Do-Not-Disturb (DND) can only be set through the PDN, but cannot be set through the NPDN.
•
Timed Reminder (Alarm Setting) is set through the PDN, but cannot be set through the NPDN.
•
Offhook Voice Announce is available to PDN conversation, but not available to the NPDN
conversation.
conversation.
•
The appearance of incoming trunk calls have the following priority if the keys are set to the same
extension:
extension:
• Trunk/Floating Hold Key
• MCO Key
• DN Key
• Non-Appearance
Action
Result
1. Place the current call on hold.
Intercom dial tone
2. Enter the Direct Call to PDN access code (default =766
[UK/HK] or 766# [Taiwan, Malaysia, Indonesia]).
3. Dial the extension number.
Dialed number displays
4. If desired, wait until the PDN Extension answers and intro-
duce the call.
5. Hang up.
Action
Result
1. Press an NPDN (or PNPDN) key.
Intercom dial tone
2. Dial the access code for Call Forwarding (Direct = 721),
(Busy = 722), (No Answer = 723).
3. Dial the Call Forward Destination extension number.
Dialed number displays