Panasonic S-ICX Manual
202
S-ICX (International) issued October 2000
S-ICX-50-700
Chapter 5. Key Telephone Features
Section 700 - Operation
Operation
To use Direct Trunk Access:
Hardware Requirements
•
N/A
Considerations
•
N/A
MCO Line Preference
MCO Line Preference allows you to place an outside call by simply picking up the handset. When you
go offhook, the MCO 1 trunk group is automatically accessed.
go offhook, the MCO 1 trunk group is automatically accessed.
Operation
To place a call using MCO Line Preference:
Hardware Requirements
•
N/A
Considerations
•
You can press the ON/OFF key to get intercom dial tone.
MCO Trunk Access
The System supports up to 5 MCO groups for each MCO tenant group. You can seize an idle trunk
from the MCO trunk group by entering the MCO access code.
from the MCO trunk group by entering the MCO access code.
Action
Result
1. Lift the handset or press the ON/OFF key.
2. Enter the Direct Trunk Access code (default = 88).
Dialled number displays
3. Enter the desired trunk number.
• Outside dial tone
• CO XXX displays (where XXX = line
number)
4. Dial the phone number.
Dialled phone number displays
Action
Result
1. Lift the handset.
• Outside dial tone
• CO XXX displays (where XXX = trunk
number)
2. Dial the phone number.
Dialled phone number displays