Panasonic S-ICX Manual
Section 700 - Operation
Chapter 7. SLT Features
S-ICX-50-700
S-ICX (International) issued October 2000
309
To use a Walking TRS (Call Barring) COS code:
Hardware Requirements
•
N/A
Related Programming
•
FF8-1-08: Walking Class of Service Code
Considerations
•
The same Walking TRS (Call Barring) COS code can be used on more than one extension.
•
Walking TRS (Call Barring) COS mode is kept until the user goes on-hook.
•
ARS and TRS (Call Barring) dialling privileges follow the Walking TRS (Call Barring) COS.
•
Before entering a new Walking TRS (Call Barring) COS code, you must first clear the existing
code.
code.
•
When Walking TRS (Call Barring) COS is used, Wxxxx (where xxxx is the user’s extension
number) appears in Call Logging.
number) appears in Call Logging.
Action
Result
1. Lift the handset or press the ON/OFF key of an extension
other than your own.
Intercom dial tone
2. Enter the Walking TRS (Call Barring) Access code (default
= 87).
3. Dial your extension number.
4. Enter your Walking TRS COS code (0001-9999)
5. Enter a trunk access code (default = 9 [UK/HK], 0 [Taiwan,
Malaysia, Indonesia], or 81-84).
6. Dial the phone number.
Walking TRS (Call Barring) COS
remains in effect until you replace the
handset.
remains in effect until you replace the
handset.
7. Replace the handset or press the ON/OFF key.