Panasonic TX-L32X5E Guia De Utilização
Quick Start Guide
Accessories / Options
7
Attaching / removing the pedestal
Warning
Do not disassemble or modify the pedestal.
Otherwise the TV may fall over and become damaged, and personal injury may result.
Caution
Do not use any pedestal other than the one provided with this TV.
Otherwise the TV may fall over and become damaged, and personal injury may result.
Do not use the pedestal if it becomes warped or physically damaged.
If you use the pedestal while it is physically damaged, personal injury may result. Contact your local Panasonic
dealer immediately.
dealer immediately.
During set-up, make sure that all screws are securely tightened.
If insufficient care is taken to ensure screws are properly tightened during assembly, the pedestal will not be strong
enough to support the TV, and it might fall over and become damaged, and personal injury may result.
enough to support the TV, and it might fall over and become damaged, and personal injury may result.
Ensure that the TV does not fall over.
If the TV is knocked or children climb onto the pedestal with the TV installed, the TV may fall over and personal injury
may result.
may result.
Two or more people are required to install and remove the TV.
If two or more people are not present, the TV may be dropped, and personal injury may result.
When removing the pedestal from the TV, do not remove the pedestal by the methods other than the specified
procedure.
procedure.
(see below)
Otherwise the TV and / or pedestal may fall over and become damaged, and personal injury may result.
Assembly screw (4)
M5 × 15
Assembly screw (4)
M4 × 25
Bracket
TBL5ZA32261
Base
TBL5ZX0280
1
Assembling the pedestal
Use the assembly screws to fasten the bracket
Use the assembly screws to fasten the bracket
to the base securely.
Make sure that the screws are securely
tightened.
tightened.
Forcing the assembly screws the wrong way
will strip the threads.
will strip the threads.
2
Securing the TV
Use the assembly screws to fasten securely.
Use the assembly screws to fasten securely.
Tighten the four assembly screws loosely at first, then
tighten them firmly to fix securely.
tighten them firmly to fix securely.
Carry out the work on a horizontal and level surface.
B
Arrow mark
Hole for pedestal
installation
D
C
A
Front
Removing the pedestal from the TV
Be sure to remove the pedestal in the following way when using the wall-hanging bracket or repacking the TV.
Be sure to remove the pedestal in the following way when using the wall-hanging bracket or repacking the TV.
1 Remove the assembly screws from the TV.
2 Pull out the pedestal from the TV.
3 Remove the assembly screws from the bracket.
2 Pull out the pedestal from the TV.
3 Remove the assembly screws from the bracket.