Robust DataComm rdc232ir9-dv-3p-dd Repeater Guia De Especificação
Model: rdc232ir9
Isolated EIA/RS-232 Repeater (9-wire: Txd Rxd
DTR/DSR RTS/CTS CD RI Gnd)
DTR/DSR RTS/CTS CD RI Gnd)
The rdc232ir9 safely connects two RS-232 devices without danger
of ground loops and damaging surges. The RS-232 signals have
2.5kV optical isolation, plus two isolated supplies for full galvanic
isolation. Unlike self-powered isolators that weaken the RS-232
signal and stress your hardware, the rdc232ir9 boosts the signal,
effectively doubling the maximum RS-232 distance and allows
performance up to 115 kbps.
The RS-232 signals are fully isolated, plus over 1 million ohms of
impedance are added to the ground path. This effectively
decouples the signal grounds and prevents surge currents. The
RS-232 uses 9-pin d-shell with computer-style pin configuration.
All standard RS-232 signals are supported. One DTE and one DCE
port make it easy to install and test.
Isolation, industrial design, small size, DIN rail mount, user
indication, and DC supply make the rdc232ir9 a very engineer-
friendly device for your industrial data communication system.
of ground loops and damaging surges. The RS-232 signals have
2.5kV optical isolation, plus two isolated supplies for full galvanic
isolation. Unlike self-powered isolators that weaken the RS-232
signal and stress your hardware, the rdc232ir9 boosts the signal,
effectively doubling the maximum RS-232 distance and allows
performance up to 115 kbps.
The RS-232 signals are fully isolated, plus over 1 million ohms of
impedance are added to the ground path. This effectively
decouples the signal grounds and prevents surge currents. The
RS-232 uses 9-pin d-shell with computer-style pin configuration.
All standard RS-232 signals are supported. One DTE and one DCE
port make it easy to install and test.
Isolation, industrial design, small size, DIN rail mount, user
indication, and DC supply make the rdc232ir9 a very engineer-
friendly device for your industrial data communication system.
RS-232 port Description:
Signal Type ............................ EIA/RS-232 (C to F)
Voltage Levels ....................... +/- 9v DC
Permitted Surge ..................... +/- 25v DC
Surge Diodes Installed .......... +/- 15v, 500 watt
Voltage Levels ....................... +/- 9v DC
Permitted Surge ..................... +/- 25v DC
Surge Diodes Installed .......... +/- 15v, 500 watt
Isolation (ISO/IEC 9549):
RS-232 to RS-232 ................. 2500v (optical, 5kV test)
Power to RS-232 Port F ........ 2500v (galvanic, 3kV test)
Power to RS-232 Port L ......... model -2p = none, -3p = 2500v
Conformal Coating ................. (optional) 5000v rating
Power to RS-232 Port F ........ 2500v (galvanic, 3kV test)
Power to RS-232 Port L ......... model -2p = none, -3p = 2500v
Conformal Coating ................. (optional) 5000v rating
Power Supply Options:
5v DC +/- 5% (4.75-5.25v)...... 5v for OEM integration
9v to 36v DC (1 W max).....…. 12v or 24v including batteries
38v to 58v DC (1.2 W max)…..48v for Telco integration
User Indication ....................... Green LED for power status
9v to 36v DC (1 W max).....…. 12v or 24v including batteries
38v to 58v DC (1.2 W max)…..48v for Telco integration
User Indication ....................... Green LED for power status
Communication:
Max Speed ............................ 115200 bps
Character Setting ................... Transparent, no config required
User Indication ....................... Yellow LED for data received (Rxd)
and DTR status (Rdy)
Standard Distance ................. 15m with 2500pf per wire
Practical maximum Distance.. 55m with low-cap (42pF) cable
Character Setting ................... Transparent, no config required
User Indication ....................... Yellow LED for data received (Rxd)
and DTR status (Rdy)
Standard Distance ................. 15m with 2500pf per wire
Practical maximum Distance.. 55m with low-cap (42pF) cable
Environmental:
Ambient operating temperature.. 0C to + 60C
Ambient storage temperature…. -40C to +100C
Relative Humidity................……. 10 to 95% RH, non condensing
Casing……………………………. good fungus & termite
resistance; self-extinguishing.
Weight .................................…. ..130g.
DB9 Connectors .................... … 30µ gold pins, 500 insertion cycles
Screw Terminal Capacity .....… 2.5mm strand (12 AWG)
Ambient storage temperature…. -40C to +100C
Relative Humidity................……. 10 to 95% RH, non condensing
Casing……………………………. good fungus & termite
resistance; self-extinguishing.
Weight .................................…. ..130g.
DB9 Connectors .................... … 30µ gold pins, 500 insertion cycles
Screw Terminal Capacity .....… 2.5mm strand (12 AWG)
4.0mm solid (12 AWG).
Mounting Rail .......................….. DIN EN 50022
(35mm symmetrical)
DIN EN 50025
(32mm asymmetrical)
(Note: Style DIN 50022 works best)
Copyright © 1997 Robust DataComm Pte Ltd
(Version 1.1) Specifications subject to change without notice
Block Diagram
Application Details:
The rdc232ir9 is ideal for use with radio modems or in situations
where you desire maximum future flexibility. Since all 9 standard
signals pass through the isolator, you can support any RS-232 serial
application.
where you desire maximum future flexibility. Since all 9 standard
signals pass through the isolator, you can support any RS-232 serial
application.
Order Information:
Example: model rdc232ir9-dv-3p-dd is an “Isolated RS-
232 Repeater, 9-wire, DIN-Rail Mount, 9-36vDC Supply,
Full 3-of-3 Ground Isolation, both RS-232 ports with 30µ
gold-plated 9-pin D-shell connectors.”
232 Repeater, 9-wire, DIN-Rail Mount, 9-36vDC Supply,
Full 3-of-3 Ground Isolation, both RS-232 ports with 30µ
gold-plated 9-pin D-shell connectors.”
Mechanical Dimensions: mm (inches)
rdc232ir9
Input Power Supply (Select One)
dv
9 to 36vDC, 1 watt (50mA@24v)
hv
38 to 58vDC, 1.2 watt (25mA@48v)
5v
5vDC +/- 5% (150mA max)
Ground Isolation (Select One)
3p
Full 3-of-3
2p
Partial 2-of-3 (Port L = Power Ground)
Connectors (No Option)
dd
9-pin D-Shell (one DCE, one DTE)
Other Options (none required)
fc Conformal Coating (+5000v)
5v Test
Pwr-B
Rd
y-B
Rc
v-B
Pwr-
A
Rd
y-
A
Rc
v-
A