Puls UZK12.071 Battery Guia De Especificação

UZK12.071, UZO12.07

U-Series

ATTERY

ODULE

12V,

7AH

10. R

EPLACING

ATTERIES

Disconnect battery fuse before replacing the battery.

Always dispose the battery through a recycling organization. Batteries must be completely discharged before
recycling. Batteries can also be returned to PULS or the battery manufacturer.

Battery replacements can be acquired through PULS. PULS also offers a list with recommended batteries in case
batteries need to be acquired elsewhere.

Fig. 10-1 Replacing the battery

To replace battery:

1) Loosen screw with only one turn and

2) Slide the mounting bracket sideways.

3) Tilt the mounting bracket to the front and

take it off

4) Unplug the battery terminals

5) remove the battery

6) To insert the new battery use same

procedure vice versa.

11. E

NVIRONMENT

Operational temperature

-10°C

**)

to +40°C (14°F to 104°F)

for charging

-15°C to +50°C (5°F to 122°F)

for discharging

Storage temperature

-20°C to +50°C (-4°F to 122°F)

for storage and transportation

Humidity

5 to 95% r.h.

IEC 60068-2-30
Do not energize while condensation is present

Vibration sinusoidal

±4mm at 16.7Hz
fixed frequency for 1hour

Vibration in vertical mounting orientation
according to IEC/EN 61056-1

Shock

free fall from 20cm
onto a wooden floor

Shock with bottom down orientation
according to IEC/EN 61056-1

Altitude

0 to 6000m (0 to 20 000ft)

without any restrictions

Degree of pollution

IEC 62103, EN 50178, not conductive

LABS compatibility

The unit does not release any silicone or other LABS-critical substances and is suitable for
use in paint shops.

Operational temperature is the same as the ambient temperature and is defined as the air temperature 2cm below the unit.

**) Frequently charging below +5°C (41°F) reduced the lifetime of the battery

Jul. 2014 / Rev. 2.0 DS-UZK12.071
All parameters are specified at, 25°C ambient temperature unless otherwise noted.

www.pulspower.com Phone +49 89 9278 0 Germany

4/9