Roxtec C RS T 31 Cable Entry Seal Guia De Especificação
26
www.roxtec.com
Roxtec C RS T seal
Type
Roxtec C RS T
Sleeve and nut
Nickel plated brass
Gasket
EPDM rubber
C RS T seal
Stainless steel AISI 316, EPDM rubber
Rating
UL/NEMA 4, 4x, 12 and 13,
IP 66/67 according to IEC 60529
The Roxtec C RS T is designed for use as a
single cable or pipe seal in thin cabinet walls.
The Roxtec C RS T fits into struc-
tures with up to 1.102” thickness
and is available in four sizes for
tures with up to 1.102” thickness
and is available in four sizes for
cables or pipes with diameters rang-
ing from 0.142” to 1.181”.
ing from 0.142” to 1.181”.
Fast and easy installation
Insert the threaded sleeve in the
hole and fasten it with the lock nut.
Adapt the two halves of the C RS T
seal to fit the cable or pipe by peel-
ing off layers. The two halves are
placed around the cable or pipe
and inserted into the sleeve. Finally,
the screws on the front fittings are
tightened to compress and seal the
transit.
hole and fasten it with the lock nut.
Adapt the two halves of the C RS T
seal to fit the cable or pipe by peel-
ing off layers. The two halves are
placed around the cable or pipe
and inserted into the sleeve. Finally,
the screws on the front fittings are
tightened to compress and seal the
transit.