Panduit CJ688TGBU CAT 6 Module Guia De Especificação

Página de 2
www.panduit.com
s p e c i f i c a t i o n s
Category 6/Class E, 8-position, UTP jack module shall terminate 4-pair, 22 – 26 AWG, 
100 ohm unshielded twisted pair cable and shall not require use of a punchdown tool. 
UTP jack modules shall use a forward motion termination method to optimize 
performance by maintaining cable pair geometry while eliminating conductor untwist. 
The termination cap shall be color-coded white to designate Category 6 performance 
and shall include a universal label coded for T568A and T568B wiring schemes.
Mini-Com
®
 
TX6
 PLUS UTP Jack Modules
S P E C I F I C A T I O N   S H E E T
t e c h n i c a l   i n f o r m a t i o n
Category 6/Class 
E channel and 
component 
performance:
Exceeds channel requirements of ANSI/TIA-568-C.2 Category 6 and ISO 11801 
Class E standards at swept frequencies 1 to 250 MHz 
Exceeds component requirements of ANSI/TIA-568-C.2 Category 6 and ISO 
11801 Class E standards at swept frequencies 1 to 250 MHz
FCC and 
ANSI compliance:
Meets ANSI/TIA-1096-A contacts plated with 50 microinches of gold for
superior performance
IEC compliance:
Meets IEC 60603-7 and IEC 60512-99-001
RoHS compliance:
Compliant
PoE compliance:
Rated for 2500 cycles with IEEE 802.3af / 802.3at and proposed 802.3bt
type 3 and type 4
UL rated:
UL 1863 (Use as communications circuit accessory)
UL 2043 (Suitable for use in air-handling spaces)
Operating  
Temperature:
-10°C to 65°C (14°F to 140°F)
Conductor 
termination range:
Wire cap compatible with 22 – 26 AWG solid or stranded cable with conductor 
insulation diameters of 0.060 in. max. and overall cable O.D. 0.200 in. to 0.330 in.
k e y   f e a t u r e s   a n d   b e n e f i t s
100% performance tested
Confidence that each jack module will deliver the critical electrical 
performance requirements
Utilizes enhanced 
Giga-TX
 Technology
Optimizes performance by eliminating conductor untwist and reduces 
installation time and expense
Modular
UTP jack modules snap in and out of all Mini-Com
®
 Faceplates, Modular 
Patch Panels and Surface Mount Boxes for easy moves, adds, 
and changes
Individually serialized
Marked with quality control number for future traceability
RJ45 interface
Industry standard interface provides a quick and easy plug and play 
connection to RJ45 patch cords; backwards compatible
Identification
Can be clearly identified with optional labels and icons for port identification
Angle termination 
version available
Side opening allows cable to be terminated to the right or left side of the 
jack module; ideal for installations that have minimal depth that may not 
allow standard bend radius practices to be accommodated
Termination tools 
(optional)
EGJT termination tool ensures conductors are fully terminated by utilizing 
a smooth forward motion without impact on critical internal components 
for maximum reliability; TGJT termination tool ideal for high 
volume installations
Block out device (optional) Provides a simple and secure method to control access to data ports while 
not in use
Shuttered version 
(optional)
Integrated spring shuttered door keeps out dust and debris of unmated 
RJ45 jack modules automatically
a p p l i c a t i o n s
Mini-Com
®
 TX6
 PLUS UTP Jack Modules are a component of the TX6
 PLUS UTP Copper Cabling 
System. This end-to-end system is interoperable and backwards compatible, providing design flexibility 
to protect network investments well into the future. With certified performance to the ANSI/TIA-568-C.2 
Category 6 and ISO 11801 Class E standards, this system is ideal for today's high performance workstation 
applications. With certified performance to the ANSI/TIA-568-C.2 Category 6 and ISO 11801 Class E 
standards, these systems will support the following applications:
• Ethernet 10BASE-T, 100BASE-T (Fast Ethernet), 1000BASE-T (Gigabit Ethernet)
• 155 Mb/s ATM, 622 Mb/s ATM, 1.2 Gb/s ATM
• Token Ring 4/16
• Digital video and broadband/baseband analog video
• Voice over Internet Protocol (VoIP)
TX6
 PLUS UTP Copper
Cabling Systems
Mini-Com
®
 TX6
 PLUS 
UTP Jack Modules
Jack module: 
CJ688TG*
Shuttered jack 
module: 
CJH688TG*
Right angle 
jack module: 
CJR688TG*
TX6000
 UTP Copper Cable
Plenum: 
PUP6004***
Riser: 
PUR6004***
LSZH (60332-1): 
PUZ6004***
LSZH (60332-3): 
PUL6004***
CM: 
PUC6004***
Category 6 Performance SD UTP 28 AWG 
Patch Cords (Dual Rated CM/LSZH)
Feet: 
UTP28SP^
Meters: 
UTP28SP^^M
TX6
 PLUS UTP Patch Cords
CM (foot lengths): 
UTPSP^Y
CM (meter lengths):  UTPSP^^MY
LSZH (meter lengths): UTPSPL^^MY
Mini-Com
®
 Angled Modular
Patch Panels
24-port, 1 RU: 
CPPLA24WBLY
48-port, 2 RU: 
CPPLA48WBLY
Mini-Com
®
 Flat Modular
Patch Panels
24-port, 1 RU: 
CPPL24WBLY
48-port, 2 RU: 
CPPL48WBLY
For additional modular patch panels and 
punchdown patch panels, visit www.panduit.com
Tools and Accessories
Jack module
termination tool: 
EGJT or TGJT
Wire snipping tool: 
CWST
Wire stripping tool:  CJAST
Clear dust cap: 
MDC-C
Block out device: PSL-DCJB-^^^
Phone icons: CIPIW-C
+
Data icons: CIDIW-C
+
*To designate color, add suffix: IW (Off White), replace 
IW suffix with WH (White), EI (Electric Ivory), WH (White), 
IG (International Gray), AW (Arctic White), BL (Black), 
BU (Blue), RD (Red), YL (Yellow), GR (Green), 
OR (Orange), VL (Violet), BR (Brown), GD (Gold), LB 
(Light Blue), or PK (Pink). 
***To designate color, add suffix BU (Blue) or WH (White). 
For additional cable colors, contact customer service.
^For lengths 1 to 20 feet (one foot increments) and 25, 
30, 35, 40 feet, change the length designation in the part 
number to the desired length. For standard cable colors 
other than Off White, add suffix BL (Black), BU (Blue), 
RD (Red), YL (Yellow), GR (Green), OR (Orange), or 
VL (Violet). For example, the part number for a blue 
15-foot patch cord is UTPSP15BUY.
^^For lengths 1 to 10 meters (one meter increments) and 
2.5, 15, 20, 25, 30, 35, 40 meters, change the length 
designation in the part number to the desired length. For 
standard cable colors other than Off White, add suffix 
BL (Black), BU (Blue), RD (Red), YL (Yellow), GR (Green), 
OR (Orange), or VL (Violet). For example, the part number 
for a blue 15-meter patch cord is UTPSP15MBUY.
^^^To designate color other than Red, add suffix
Black (BL), Blue (BU), Yellow (YL), Green (GR),
Orange (OR), Off White (IW) or International Gray (IG) 
at the end of the part number. 10/package.
+
To designate color other than IW (Off White), 
replace IW with EI (Electric Ivory), IG (International Gray), 
BL (Black), BU (Blue), RD (Red), YL (Yellow), 
GR (Green), OR (Orange), or VL (Violet) in the part 
number. 100/package.
Contact customer service for bulk packaged and/
or keyed jack modules and patch cords.