Panduit ISPS688FA CAT 6A RJ45 Plug Guia De Especificação
www.panduit.com
s p e c i f i c a t i o n s
8-position, industrial plug shall be applicable for use in manufacturing as
well as other industrial environments. The product shall meet or exceed the
component requirements of the ANSI/TIA-568-C.2 Category 6 and Category 5e,
ISO 11801 Class E and Class D, and ODVA Ethernet/IP standards. It shall also
meet the channel requirements of ANSI/TIA-568-C.2 Category 6A and ISO
11801 2nd Edition Class E
A
in a 4-connector configuration up to 100 meters at
swept frequencies up to 500MHz when installed with other Panduit Category
6A components. The RJ45 plug shall be constructed of zinc die cast housing
with 360° shielding and shall include a dust cap. The plug shall incorporate
an ingress protection rating of IP20 and offer an extended temperature range
as required for more demanding applications. The plug shall be easily field
attachable without any special tools and shall be capable of termination to
either a 2-pair or 4-pair solid or stranded twisted pair copper cable.
IndustrialNet
™
Category 6A RJ45
Field Terminable Plug
S P E C I F I C A T I O N S H E E T
a p p l i c a t i o n s
IndustrialNet
™
Category 6A RJ45 Field Terminable
Plug provides an ideal solution to support Industrial
Ethernet from the Local Area Network (LAN) based
support offices to the processing devices on the
plant floor, for applications up to and including
10GBASE-T Ethernet. A key component to an
overall industrial Ethernet application, the plug is the
interface that protects the integrity of the Ethernet
data transfer from the switch or PLC out to the
devices, or up to the horizontal plant backbone.
Constructed of a robust die cast housing and fully
shielded, the plug is ideal for use in high noise
(EMI/RFI) environments. Field attachable for on-site
termination allows quick installation. The extended
temperature range -40°C to 85°C (-40°F to 185°F) is
ideal for use in more demanding applications such
as manufacturing facilities where temperature
extremes are the norm.
t e c h n i c a l i n f o r m a t i o n
Electrical/
mechanical performance:
Exceeds channel and patch cord requirements of ANSI/TIA-568-C.2
Category 6 and Category 5e, and ISO 11801 Class E and Class D
standards at swept frequencies up to 250MHz and 100MHz respectively
and meets ODVA Ethernet/IP electrical and mechanical performance
requirements when installed with other Panduit components.
Meets the channel requirements of ANSI/TIA-568-C.2 Category 6A and
ISO 11801 2nd Edition Class E
A
in a 4-connector configuration up to
100 meters at swept frequencies up to 500MHz when installed with other
Panduit Category 6A components.
UL/IEC compliance:
Meets UL 1863 and IEC 60603-7-51
IP compliance:
Rated IP20
RoHS compliancy status:
Compliant
PoE compliance:
Meets IEEE 802.3af and IEEE 802.3at for PoE applications
Temperature rating:
-40°C to 85°C (-40°F to 185°F) operating and storage
Wiring scheme:
T568A/T568B
Conductor
termination range:
Solid AWG 24/1-22/1, Stranded AWG 27/7-22/7,
AWG 24/19-22/19
Insulation
termination range:
ISPS688FA: 1.0 – 1.6mm (0.039 – 0.063 in.)
ISPS688FAS: 0.85 – 1.0mm (0.033 – 0.039 in.)
Cable jacket
diameter range:
5.0 – 9.0mm (0.197 – 0.354 in.)
Packaging:
1 unit per PE bag, 10 units per carton
k e y f e a t u r e s a n d b e n e f i t s
Robust construction
Zinc die cast housing with 360° shielding and full metal shielding between
wire pairs; secure data transmission in high noise (EMI/RFI) environments;
dust cap protection; three strain relief settings (cable diameters 5.0mm to
9.0mm)
Field attachable
Can be assembled in 60 seconds without any special tools
Extended
temperature range
-40°C to 85°C (-40°F to 185°F)
*To designate color, add suffix TL (Teal),
BL (Black), RD (Red), BU (Blue) GY (Gray),
or YL (Yellow).
**For other lengths, change the length designation
**For other lengths, change the length designation
(1M) of the part number to the desired length (0.3M,
0.6M, 2M, 3M, 5M, or 10M); to designate color,
replace TL (Teal) suffix with BL (Black), RD (Red),
or YL (Yellow). For example, the part number of a
2-meter teal patch cord is ISTPHCH2MTL.
***For standard colors other than Off White,
***For standard colors other than Off White,
replace IW in part number with BL (Black),
EI (Electric Ivory), IG (International Gray),
or WH (White).
IndustrialNet
™
Category 5e
Shielded 600 V-Rated Patch Cords
CM/CMX
outdoor:
**ISTPHCH1MTL
IndustrialNet
™
M12 D-Code to RJ45
Panel Mount Adapter
Panel
mount adapter:
ICAM12DRJS
Mini-Com
®
Modular Patch Panel
8-port:
CDPP8RG
DIN Rail Adapter
1-port:
CADIN1IW***
IndustrialNet
™
Category 6A/6/5e RJ45
Field Terminable Plug for cables with
1.0-1.6mm (0.039-0.063 in.) insulation
diameter
Plug:
ISPS688FA
Replacement wire
manager:
ISPS688FA-WM
IndustrialNet
™
Category 6A/6/5e RJ45
Field Terminable Plug for cables with
0.85 -1.0mm (0.033-0.039 in.)
insulation diameter
Plug:
ISPS688FAS
Replacement wire
manager:
manager:
ISPS688FAS-WM
IndustrialNet
™
Category 5e SF/UTP
Copper Cable
CM
2-pair:
ISFCH5C02A*-XG
4-pair:
ISFCH5C04A*-XG
Flame retardant, halogen-free
2-pair/color Teal:
ISFX5502ATL-LED
2-pair/color Red:
ISFX5502ARD-LED
IndustrialNet
™
Category 5e F/UTP
Copper Cable
CM 4-pair/
color Black:
color Black:
IFC5C04BBL-CEG
IndustrialNet
™
Category 5e U/UTP
Copper Cable
CM 4-pair/
color Black:
IUC5C04ABL-CEG
IndustrialNet
™
Category 6 F/UTP
Copper Cable
CM 4-pair/
color Black:
IFC6C04BBL-CEG
IndustrialNet
™
Category 6 U/UTP
Copper Cable
CM 4-pair/
color Black:
IUC6C04ABL-CEG
IndustrialNet
™
Category 6 S/FTP
Copper Cable
Flame retardant, halogen-free
4-pair/color Yellow: ISX6004AYL-LED
4-pair/color Red:
ISX6004ARD-LED
IndustrialNet
™
M12 D-Code Field
Terminable Plug
Field
terminable plug:
ISPS5E44MFA