Pro-Ject 6 PerspeX 3081110142 Folheto

Pro-Ject Audio Systems is a registered trademark of Heinz Lichtenegger 

1050 Vienna · Margareten Road 98 · Tel. +43(0)15448580 · Fax. +43(0)15456697 

www.project-audio.com · © Heinz Lichtenegger · Revision 1.4.10 

 

 

Pro-Ject 6 Perspe

 

Manual turntable 

Product information

 

Turntable 

 

The transparent acrylic plinth stands on three individually height-adjustable Sorbothane

®

-damped aluminium 

cones and carries the motor and the sub-chassis. The sub-chassis, made of Corian, rests on tree magnetic 

fields. A supplied spirit level allows easy adjustment of the sub-chassis. 

 

A quiet running AC motor with a two-step pulley drives the platter's outside edge via a belt. 

 

The inverted bearing uses a stainless-steel axle carrying a ceramic ball on which the ceramic bearing plate runs. 

 

The resonance-optimised platter is a sandwich construction utilising a fine-balanced medium density fibre 
platter weighing 2Kg and a 4mm thick flat-ground layer of vinyl and a screw-down metal record clamp. 

 

Connection to the phono input of the amplifier can be made with connecting cables of your taste through the 
gold plated phono sockets and earth screw. A standard cable is provided. 

 

External power supply avoids potential electro-mechanical interference. 

Tonearm  Pro-Ject 9cc Evolution 

 

The headshell and armtube are fashioned from a single piece of carbon-fibre. 

 

Conical armtube avoids standing wave reflections. 

 

Inverted tonearm bearing comprises four hardened stainless tips in ABEC7 spec ballraces. 

 

Rings provide very solid arm bearing housings. The massive outside ring is open to avoid resonances. 

 

Sorbothane

®

-damped counterweight effectively counteracts unwanted resonances. 

 

The counterweights supplied are suitable for cartridges weighing between 5 - 7,5g, 7 - 10g, 9 - 11g or 10 - 14g 

 

Counterweight shaft lowered to record level reduces cantilever forces and dynamic wow when playing 
warped records. 

 

Solid armbase permits accurate height adjustment of armtube and VTA (vertical tracing angle). 

 

Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell. 

 

Silicone-damped armlift can be adjusted to suit working height of the arm. 

 

The internal wiring consists of flexible high-purity copper from the headshell right through to the gold-plated 
phono sockets. 

Dimensions W x H x D: With dust cover closed 460 x 160 x 365mm, dust cover open 460 x 420 x 465mm. 
 

The manufacturer reserves the right to alter the technical specifications without notice.