JL Audio JLINK™ TRX High-Fidelity Audio Transmitter & Receiver Kit Manual Do Proprietário
LED Status Indicator
A green LED light is located next to the power jack on the transmitter
and receiver to indicate each module’s status. Refer to the following
tables for its function and meaning.
and receiver to indicate each module’s status. Refer to the following
tables for its function and meaning.
LED Status - Transmitter
Action
Action
LED Function
Mode
When first connected
to power
to power
3 rapid blinks, 1
long blink, OFF
long blink, OFF
Startup
Audio signal detected
ON
Begin RF link
No audio signal detected
OFF
Standby
No audio signal for 30
minutes
minutes
OFF
Low Power Sleep*
*Transmitter will reawaken when audio is detected again.
Note: Plugging RCA cables in to the transmitter without a source
connected will cause LED on transmitter and receiver to turn ON.
connected will cause LED on transmitter and receiver to turn ON.
LED Status - Receiver
Action
Action
LED Function
Mode
When first connected
to power
to power
3 rapid blinks,
OFF
OFF
Startup
Audio signal detected
ON
RF link established
With RF link, no audio
signal detected
signal detected
1 flash every 3
seconds
seconds
Standby
With RF link, no audio
signal for 30 minutes
signal for 30 minutes
OFF
Low Power Sleep*
*Receiver will reawaken when audio is detected again.
Specifications - System
S/N Ratio
80 dB @ 1 kHz, 500 mV
THD+N
0.02% @ 1 kHz, 500 mV
Crosstalk
>75 dB @ 1 kHz, 500 mV
Frequency Response
16 Hz – 22 kHz (+0, -1dB)
Wireless Range
100 feet / 30 meters (typical)
Wireless Channels
3 available, selectable via switch
Latency
14 mS
Operating Temperature
32 to 104 °F / 0 to 40 °C
AC Power Adaptor
1 A, 5 volts DC
Specifications - Transmitter
Inputs
Analog, left and right RCA-type
Input Impedance
25 kΩ
Outputs
Bit-Perfect PCM Stereo Digital via
2.4 GHz Wireless
2.4 GHz Wireless
Receivers Supported
Up to 4
Bit Depth/Sample Rate
16 Bit / 48 kHz
Power Requirements
200 mA, 5 volts (via AC adaptor)
Dimensions
3.5 in x 3.5 in x 1.12 in
89 mm x 89 mm x 28.5 mm
89 mm x 89 mm x 28.5 mm
Specifications - Receiver
Inputs
Bit-Perfect PCM Stereo Digital via
2.4 GHz Wireless
2.4 GHz Wireless
Outputs
Analog, left & right RCA-type or
Analog via JLINK port to compatible
product
Analog via JLINK port to compatible
product
Output Impedance
250 Ω
Full Scale
Output Voltage
1.2 V
Power Requirements
100 mA, 5 volts (via AC adaptor or
JLINK port
JLINK port
Dimensions
3.5 in x 3.5 in x 1.12 in
89 mm x 89 mm x 28.5 mm
89 mm x 89 mm x 28.5 mm