Kenwood DDX374BT Manual Do Proprietário

74

R USB

“Reading” does not disappear from the screen.
•  Turn the power off and on again.

While playing a track, sound is sometimes 
interrupted.
•  The tracks are not properly copied into the USB 

device. Copy the tracks again, and try again.

Tracks are not played back as you have intended 
them to play.
•  Playback order may differ from the one played 

back using other players.

R Android

Sound cannot be heard during playback.
•  Reconnect the Android device.
• When <Android Setup> is set to [HAND MODE], 

launch any media player application on the 
Android device and start playback.

Sound output only from the Android device.
• When <Android Setup> is set to [HAND MODE], 

relaunch the current media player application or 
use another media player application.

•  Restart the Android device.
•  If this does not solve the problem, the connected 

Android device is unable to route the audio signal 
to unit.

Cannot playback when <Android Setup> is set to 
[BROWSE MODE].
•  Make sure KENWOOD Music Play APP is installed 

on the Android device.

•  Reconnect the Android device and select the 

appropriate control mode.

•  If this does not solve the problem, the connected 

Android device does not support the Browse 
Mode.

“NO DEVICE” or “READING” keeps flashing.
•  Switch off the developer options on the Android 

device.

•  Reconnect the Android device.
•  If this does not solve the problem, the connected 

Android device does not support the Browse 
Mode.

R iPod/iPhone

No sound comes out of the speakers.
•  Disconnect the iPod/iPhone, then connect it again.
•  Select another source, then reselect “iPod”.

The iPod/iPhone does not turn on or does not 
work.
•  Check the connecting cable and its connection.
•  Update the firmware version.
•  Charge the battery.
•  Reset the iPod/iPhone.

Sound is distorted.
•  Deactivate the equalizer either on this unit or the 

iPod/iPhone.

A lot of noise is generated.
•  Turn off (uncheck) “VoiceOver” on the iPod/

iPhone. For details, visit <http://www.apple.com>.

No operations are available when playing back a 
track containing artwork.
•  Operate the unit after the artwork has loaded.

Videos cannot be played.
•  Connect with USB Audio and Video cable 

KCA-iP202 (optional accessory) to iPod/iPhone 
30-pin connector model. Other cables cannot be 
used.

• Select [USB+AV-IN] for <iPod Setup>. 

(Page 20)

No sound of videos comes out.
•  Connect with USB Audio and Video cable 

KCA-iP202 (optional accessory) to iPod/iPhone 
30-pin connector model. Other cables cannot be 
used.

• Select [USB+AV-IN] for <iPod Setup>. 

(Page 20)

R Radio

AME automatic presetting does not work.
•  Store stations manually. (Page 29)

Static noise while listening to the radio.
•  Connect the antenna firmly.

R AV-IN

“AV-IN” cannot be selected on the Home screen.
• Select [USB 1 Wire] for <iPod Setup>. 

(Page 20)

No picture appears on the screen.
•  Turn on the video component if it is not on.

2017DDX-Entry_K.indb   74

2016/06/03   10:07