Kenwood KMR-M318BT Manual Do Proprietário
ENGLISH
7
RADIO
(for
/
/
)
Search for a station
1
Press
repeatedly to select TUNER.
2
Press
repeatedly (or press
/
on
the remote control) to select FM1/FM2/FM3/AM.
3
Press
S / T (or press S /
on the remote
control) to search for a station.
• To change the searching method for
S / T: Press
repeatedly.
AUTO1
: Automatically search for a station.
AUTO2
: Search for a preset station.
MANUAL : Manually search for a station.
• To store a station: Press and hold one of the number
• To store a station: Press and hold one of the number
buttons (1 to 6).
• To select a stored station: Press one of the number buttons
(1 to 6) (or press one of the number buttons (1 to 6) on the
remote control).
remote control).
Direct Access Tuning
(using the remote control)
1
Press DIRECT to enter Direct Access Tuning.
2
Press the number buttons to enter a frequency.
3
Press
to search for a station.
• To cancel, press
or DIRECT.
• If no operation is done for 10 seconds after step
2
, Direct
Access Tuning is automatically canceled.
HD Radio™ tuner
(for
)
3
Press the volume knob to display the information related to the message.
4
Press
again to exit.
• “NO LIST” appears when the list is empty.
• This feature can store up to four messages in the list.
• To clear the message list, set [FACTORY RESET] to [YES]. ( 5)
• This feature can store up to four messages in the list.
• To clear the message list, set [FACTORY RESET] to [YES]. ( 5)
Other settings
1
Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select an item (see the following table), then press
the knob.
the knob.
3
Repeat step
2
until the desired item is selected or activated.
4
Press and hold
to exit.
To return to the previous setting item, press
.
Default: XX
TUNER SETTING
IF BAND
AUTO: Increases the tuner selectivity to reduce interference noises from adjacent
FM stations. (Stereo effect may be lost.) ; WIDE: Subjects to interference noises from
adjacent FM stations, but sound quality will not be degraded and the stereo effect will
remain.
FM stations. (Stereo effect may be lost.) ; WIDE: Subjects to interference noises from
adjacent FM stations, but sound quality will not be degraded and the stereo effect will
remain.
AUTO MEMORY
YES: Automatically starts memorizing 6 stations with good reception. ; NO: Cancels.
• Selectable only if [NORMAL] is selected for [PRESET TYPE]. ( 4)
• Selectable only if [NORMAL] is selected for [PRESET TYPE]. ( 4)
RECEIVE MODE
Sets the receive mode of the HD Radio receiver.
AUTO: Automatically tunes to analog broadcast when there is no digital broadcast. ;
DIGITAL: Tunes in to digital broadcast only. ; ANALOG: Tunes in to analog broadcast
only.
AUTO: Automatically tunes to analog broadcast when there is no digital broadcast. ;
DIGITAL: Tunes in to digital broadcast only. ; ANALOG: Tunes in to analog broadcast
only.
CLOCK
TIME SYNC
ON: Synchronizes the unit’s time to the Radio Broadcast Data System station time. ;
OFF: Cancels.
OFF: Cancels.
JS_KWD_KMM_BT518HD_KN_EN_5.indd 7
11/3/2016 2:08:49 PM