Kenwood KMR-M318BT Manual Do Proprietário

30

Bluetooth®

Echo or noise is heard 
during a phone 
conversation.

•  Adjust the microphone unit’s position. (  17)
• Check the [ECHO CANCEL] setting. (  19)

Phone sound quality 
is poor.

•  Reduce the distance between the unit and the Bluetooth device.
•  Move the car to a place where you can get a better signal reception.

Voice calling method is 
not successful.

•  Use voice calling method in a more quiet environment.
•  Reduce the distance from the microphone when you speak the 

name.

•  Make sure the same voice as the registered voice tag is used.

Sound is being 
interrupted or skipped 
during playback of a 
Bluetooth audio player.

•  Reduce the distance between the unit and the Bluetooth audio 

player.

•  Turn off, then turn on the unit and try to connect again.
•  Other Bluetooth devices might be trying to connect to the unit.

The connected Bluetooth 
audio player cannot be 
controlled.

•  Check whether the connected Bluetooth audio player supports 

Audio/Video Remote Control Profile (AVRCP). (Refer to the 
instructions of your audio player.)

•  Disconnect and connect the Bluetooth player again.

“DEVICE FULL”

The number of registered devices has reached its limit. Retry after 
deleting an unnecessary device. (  21, DEVICE DELETE)

“N/A VOICE TAG”

Make sure the same voice as the registered voice tag is used.

“NOT SUPPORT”

The connected phone does not support Voice Recognition feature or 
phonebook transfer.

“NO ENTRY”/“NO PAIR”

There is no registered device connected/found via Bluetooth.

“ERROR”

Try the operation again. If “ERROR” appears again, check if the device 
supports the function you have tried.

“NO INFO”/“NO DATA”

Bluetooth device cannot get the contact information.

“HF ERROR XX”/
“BT ERROR”

Reset the unit and try the operation again. If this does not solve the 
problem, consult your nearest service center.

Cleaning the unit
Wipe off dirt on the faceplate with a dry silicone or soft cloth.

Cleaning the connector
Detach the faceplate and clean the 
connector gently with a cotton swab, 
being careful not to damage the 
connector.

For:  – Latest firmware updates and latest compatible item list
 

– KENWOOD original application

   

– Any other latest information

Visit <www.kenwood.com/cs/ce/>.

Playable files
•  Playable audio file for USB mass storage class device: MP3 (.mp3), WMA (.wma), 

AAC (.aac), AAC (.m4a), WAV (.wav), FLAC (.flac)

•  Playable USB device file system: FAT12, FAT16, FAT32
  Even when audio files comply with the standards listed above, playback may be 

impossible depending on the types or conditions of media or device.

•  For detailed information and notes about the playable audio files, visit 

<www.kenwood.com/cs/ce/audiofile/>

About USB devices
•  You cannot connect a USB device via a USB hub.
•  Connecting a cable whose total length is longer than 5 m may result in abnormal 

playback.

•  This unit cannot recognize a USB device whose rating is other than 5 V and 

exceeds 1.5 A.

Connector (on the reverse 
side of the faceplate)

ENGLISH

JS_KWD_KMM_BT518HD_KN_EN_5.indd   30

11/3/2016   2:08:54 PM