Kenwood KMR-M318BT Manual Do Proprietário
ENGLISH
35
Do the required wiring.
( 36, 37)
( 36, 37)
Dashboard of
your car
your car
Bend the appropriate tabs to hold the
mounting sleeve firmly in place.
mounting sleeve firmly in place.
How to remove the unit
1 Detach the faceplate.
2 Fit the catch pin on the extraction keys
2 Fit the catch pin on the extraction keys
into the holes on both sides of the trim
plate, then pull it out.
plate, then pull it out.
3 Insert the extraction keys deeply into the
slots on each side, then follow the arrows
as shown on the illustration.
as shown on the illustration.
Installing the unit (in-dash mounting)
When installing without the mounting sleeve
1 Remove the mounting sleeve and trim plate from the unit.
2 Align the holes in the unit (on both sides) with the vehicle mounting bracket and
2 Align the holes in the unit (on both sides) with the vehicle mounting bracket and
secure the unit with screws (supplied/commercially available).
Use only the specified screws. Using wrong screws might damage the unit.
Hook on the top side
Orientate the trim plate
as illustrated before
fitting.
as illustrated before
fitting.
INSTALLATION/CONNECTION
Part list for installation
(A) Faceplate
(C) Mounting sleeve
(B) Trim plate
(D) Wiring harness
(E) Extraction key
(F) Screws (supplied for
)
For
For
/
/
For
For
/
/
JS_KWD_KMM_BT518HD_KN_EN_5.indd 35
11/3/2016 2:08:58 PM