Alpine CDE-163BT Manual Do Proprietário
26
-EN
Note
• You should connect the Audio Interrupt In Lead correctly before using
this function. For details, refer to “Connections” on page 54.
Playing MP3/WMA Data (PLAY MODE)
(CDE-163BT Only)
(CDE-163BT Only)
This unit can play back CDs containing both CD and MP3/WMA data
(created in Enhanced CD (CD Extra) format). However, in some
situations, playback of an enhanced CD may be difficult. In this case,
you can choose to play back the CD data session only. When a disc
contains both CD and MP3/WMA data, playback starts from the CD
data portion of the disc.
(created in Enhanced CD (CD Extra) format). However, in some
situations, playback of an enhanced CD may be difficult. In this case,
you can choose to play back the CD data session only. When a disc
contains both CD and MP3/WMA data, playback starts from the CD
data portion of the disc.
Setting item: PLAY MODE
Setting contents:
CD-DA / CDDA/MP3 (Initial setting)
CD-DA:
Only the CD data in Session 1 can be played back.
CDDA/MP3:
CD data, MP3/WMA files in mixed mode, and multi-session discs
can be played back.
can be played back.
Note
• Perform this setting before inserting a disc. If a disc has already been
inserted, remove it.
Setting the stay on mode
You can set the delay in turning OFF the unit’s power after the vehicle’s
ignition is turned off (ACC OFF). When you select a mode other than
OFF, the music will be paused after you turn the ignition key off (ACC
OFF). At the same time, the prompt “PRESS PRESET 6 TO STAY ON”
will scroll once. Press 6 within 15 seconds to continue enjoying music
for the selected period. If 6 is not pressed, the unit will power off within
15 seconds. During this period, you can only receive a call by operating a
paired Smartphone.
ignition is turned off (ACC OFF). When you select a mode other than
OFF, the music will be paused after you turn the ignition key off (ACC
OFF). At the same time, the prompt “PRESS PRESET 6 TO STAY ON”
will scroll once. Press 6 within 15 seconds to continue enjoying music
for the selected period. If 6 is not pressed, the unit will power off within
15 seconds. During this period, you can only receive a call by operating a
paired Smartphone.
Setting item: STAY ON
Setting contents:
OFF (Initial setting) / 5 MIN / 15 MIN / 30 MIN
Note
• Note that there is a possibility that the battery may be drained if
already weak, during this period.
Demonstration
This unit has a demonstration mode to display its various functions.
Setting item: DEMO MODE
Setting contents:
ON / STANDBY / OFF (Initial setting)
ON:
The unit starts the demonstration if there is no operation for 30
seconds.
seconds.
STANDBY:
Quit the demonstration mode. If this unit is disconnected from the
vehicle’s battery, the next time you use this unit the DEMO mode
will be ON.
vehicle’s battery, the next time you use this unit the DEMO mode
will be ON.
OFF:
Quit the demonstration mode completely.
Setting the Opening Screen Update
You can customize the unit’s Opening Screen as following steps.
Setting item: OPENING
Setting contents:
UPDATE NO (Initial setting) / UPDATE YES
1
Create a new Text file in USB memory (preferably in the
root directory) via PC.
root directory) via PC.
It’s better to remove all other files from the USB memory.
2
Rename the Text file with the desired displaying font
(maximum 10 bits), and change it’s suffix to “.bin”.
(maximum 10 bits), and change it’s suffix to “.bin”.
(For example: SOUND HU.bin)
3
Switch this unit to USB source, then select “OPENING”
“UPDATE YES” in SETUP, and then press
“UPDATE YES” in SETUP, and then press
ENTER.
4
Insert the USB memory into this unit.
After a successful update “UPDATED” will be displayed.
Notes
• Turn the ignition key to off and on to validate this setting.
• Please create Text file in English/Chinese or Japanese system.
• For non-supported characters, the display is blank.
• When paired with a Bluetooth compatible device, the font set above
• Please create Text file in English/Chinese or Japanese system.
• For non-supported characters, the display is blank.
• When paired with a Bluetooth compatible device, the font set above
(e.g. SOUND HU) will be displayed on the Bluetooth compatible device.
Changing Lighting Color
You can change the lighting color of the unit’s keys/display.
Setting item: ILLUMINATI
Further setting items: KEY & DISP( Key & Display ) /
KEY ( Key ) / DISP
KEY ( Key ) / DISP
*
( Display )
Setting contents:
OPTION / CUSTOMIZE
OPTION:
A total of 30 colors can be selected.
CUSTOMIZE:
If there is no color you prefer in OPTION, you can customize the
color as follows.
color as follows.
* You can change the lighting colour of keys and display
simultaneously or respectively by selecting KEY
&DISP or KEY/
DISP.
1
After entering CUSTOMIZE, turn the Rotary encoder to
select a color (RED, GREEN, BLUE) you want to adjust, and
then press
select a color (RED, GREEN, BLUE) you want to adjust, and
then press
ENTER.
2
The adjusted color will blink, turn the Rotary encoder to
select a value (0-60).
select a value (0-60).
R is red, G is green and B is blue.
3
Press
ENTER or t to finish the color setting.
4
Repeat steps 1 to 3 to set another color.
Notes
• In step 2, you can switch to another color setting mode by pressing
or .
• The setting values in OPTION mode and CUSTOMIZE mode are
linked, when the setting value in CUSTOMIZE is different from the one
in OPTION, “USER” will be displayed in OPTION mode.
in OPTION, “USER” will be displayed in OPTION mode.
Display Setting