Pioneer Stage 4 DEX-P99RS Manual Do Proprietário

Operation modes

This unit

’s 4 way network DSP lets you create

a 4 way multi amp, multi speaker system with
separate speakers for reproduction of high,
middle, low and ultra low frequencies (bands),
each driven by a dedicated power amp. The 4
way network mode provides network and time
alignment functions. These two functions are
essential for a multi amp, multi speaker sys
tem to enable precise control over settings for
each frequency range.

Important

Even when the battery is disconnected or the mi
croprocessor is reset, this unit

’s audio setting re

mains in the memory. If you want to reset the
audio setting, refer to Resetting the audio func
tions on page 38.

Note

If one subwoofer is used with this system, left
and right channel adjustment values, such as
time alignment and network settings, need to be
the same.

Adjusting the audio easily

By carrying out the following settings/adjust
ments in the order shown, you can create a fi
nely tuned sound field effortlessly.

1 Using the position selector (POSI)
2 Auto TA and EQ (auto time alignment and auto

equalizing)

3 Using balance adjustment on the next page

(

BAL)

Adjusting the audio finely

By carrying out the following settings/adjust
ments in the order shown, you can create a fi
nely tuned sound field.

1 Adjusting the time alignment (TA2)
2 Adjusting network (NW 1, NW 2, NW 3)
3 Fine adjusting equalizer curve (EQ 2)

Extra functions

These functions are helpful in adjusting the
sound to suit your system or your personal
preferences.

! Recalling or copying equalizer curves (EQ 1)

! Adjusting loudness (LOUD)

! Using the sound retriever (S.Rtrv)

! Adjusting source levels (SLA)

Introduction of audio
adjustments

1 Audio display

Shows the audio adjustment status.

Press MULTI-CONTROL to display the

main menu.

Use MULTI-CONTROL to select AUDIO.

Turn to change the menu option. Press to se
lect.

Turn MULTI-CONTROL to select the

audio function.
Turn

MULTI-CONTROL to switch between the

audio functions in the following order.
BAL (balance adjustment)

POSI (position se

lector)

NW 1 (network adjustment 1)

NW 2

(network adjustment 2)

NW 3 (network ad

justment 3)

TA1 (time alignment setting)

TA2 (time alignment adjusting)

EQ 1 (copy

ing/recalling the equalizer)

EQ 2 (31 band

graphic equalizer)

A.EQ (auto equalizer on/

off)

S.Rtrv (advanced sound retriever)

LOUD (loudness)

SLA (source level adjust

ment)

# When selecting FM as the source, you cannot
switch to

SLA.

# When selecting FLAT in EQ 1, you cannot
switch to

EQ 2.

# When selecting OFF in TA1, you cannot
switch to

TA2.

# To return to the display of each source, press
B.

Audio Adjustments

Section