Pioneer Stage 4 DEX-P99RS Manual Do Proprietário
# If auto TA and EQ has not been carried out,
Please Set Auto EQ appears. This indicates that
you cannot turn this function on.
Please Set Auto EQ appears. This indicates that
you cannot turn this function on.
2
Press MULTI-CONTROL to turn the auto-
equalizer on.
# To turn auto equalizer off, press
MULTI-CONTROL again.
MULTI-CONTROL again.
Using the sound retriever
The sound retriever function automatically en
hances compressed audio and restores rich
sound.
hances compressed audio and restores rich
sound.
1
Use MULTI-CONTROL to select S.Rtrv in
the audio function menu.
Refer to Introduction of audio adjustments on
page 24.
Refer to Introduction of audio adjustments on
page 24.
2
Press MULTI-CONTROL to select the de-
sired setting.
OFF (off)
OFF (off)
MODE1
MODE2
# MODE1 is effective for the low compression
rate.
# MODE2 is effective for the high compression
rate.
# This function can be used for the audio data
stored in a CD, DVD, Bluetooth Audio, iPod, USB
or AUX.
rate.
# MODE2 is effective for the high compression
rate.
# This function can be used for the audio data
stored in a CD, DVD, Bluetooth Audio, iPod, USB
or AUX.
Adjusting loudness
Loudness compensates for deficiencies in the
low and high sound ranges at low volume.
low and high sound ranges at low volume.
1
Use MULTI-CONTROL to select LOUD in
the audio function menu.
Refer to Introduction of audio adjustments on
page 24.
Refer to Introduction of audio adjustments on
page 24.
2
Press MULTI-CONTROL to turn loudness
on.
# To turn loudness off, press MULTI-CONTROL
again.
again.
Adjusting source levels
SLA (source level adjustment) lets you adjust
the volume level of each source to prevent ra
dical changes in volume when switching be
tween sources.
! Settings are based on the FM volume level,
the volume level of each source to prevent ra
dical changes in volume when switching be
tween sources.
! Settings are based on the FM volume level,
which remains unchanged.
1
Compare the FM volume level with the
level of the source you wish to adjust.
2
Use MULTI-CONTROL to select SLA in
the audio function menu.
Refer to Introduction of audio adjustments on
page 24.
Refer to Introduction of audio adjustments on
page 24.
3
Push MULTI-CONTROL up or down to
adjust the source volume.
Each time
Each time
MULTI-CONTROL is pushed up or
down, source volume increases or decreases.
+4 to
+4 to
–4 is displayed as the source volume is
increased or decreased.
Notes
! The AM volume level can also be adjusted
with source level adjustments.
! The built in CD player and the multi CD player
are set to the same source level adjustment
volume automatically.
volume automatically.
! External unit 1 and external unit 2 are set to
the same source level adjustment volume
automatically.
automatically.
Auto TA and EQ (auto-time
alignment and auto-
equalizing)
alignment and auto-
equalizing)
The auto time alignment is automatically ad
justed for the distance between each speaker
and the listening position.
The auto equalizer automatically measures
the car interior acoustic characteristics, and
then creates the auto equalizer curve based
on that information.
justed for the distance between each speaker
and the listening position.
The auto equalizer automatically measures
the car interior acoustic characteristics, and
then creates the auto equalizer curve based
on that information.
Audio Adjustments
En
31
Section
03
Audio
Adjustments