Pioneer Stage 4 DEX-P99RS Manual Do Proprietário
Correcting distorted sound
When listening to a CD or other source on
which the recording level is high, setting the
level of each frequency to high may result in
distortion. You can switch the digital attenua
tor to low to reduce distortion.
! Sound quality is better at the high setting
which the recording level is high, setting the
level of each frequency to high may result in
distortion. You can switch the digital attenua
tor to low to reduce distortion.
! Sound quality is better at the high setting
so this setting is usually used.
1
Use MULTI-CONTROL to select
Digital ATT in the initial setting menu.
Refer to Adjusting initial settings on page 35.
Refer to Adjusting initial settings on page 35.
2
Press MULTI-CONTROL to select the di-
gital attenuator level.
Pressing
Pressing
MULTI-CONTROL repeatedly will
switch between
High (high) and Low (low)
and that status will be displayed.
Resetting the audio functions
You can reset all audio functions.
1
Use MULTI-CONTROL to select
Audio Reset in the initial setting menu.
Refer to Adjusting initial settings on page 35.
Refer to Adjusting initial settings on page 35.
2
Press MULTI-CONTROL.
Reset data? appears in the display.
3
Push MULTI-CONTROL right.
Are You Sure? appears in the display.
4
Press MULTI-CONTROL to reset audio
functions.
Complete appears in the display and audio
functions are reset.
Complete appears in the display and audio
functions are reset.
# To cancel this function on the way, press B.
Switching the sound
muting/attenuation
muting/attenuation
Sound from this system is muted or attenu
ated automatically when the signal from the
equipment with mute function is received.
! The sound is muted or attenuated, MUTE
ated automatically when the signal from the
equipment with mute function is received.
! The sound is muted or attenuated, MUTE
or
ATT are displayed and no audio adjust
ment is possible.
! Sound from this system returns to normal
when the muting or attenuation is can
celed.
celed.
1
Use MULTI-CONTROL to select Mute in
the initial setting menu.
Refer to Adjusting initial settings on page 35.
Refer to Adjusting initial settings on page 35.
2
Press MULTI-CONTROL to switch the tel-
ephone muting/attenuation.
Each press of
Each press of
MULTI-CONTROL selects set
tings in the following order:
20dB ATT (20 dB attenuation)
20dB ATT (20 dB attenuation)
TEL mute
(mute)
10dB ATT (10 dB attenuation)
! 20dB ATT has a stronger effect than
10dB ATT.
Setting the polarity of the
door operation
door operation
Before using door mute function, it is neces
sary to set the polarity of the door operation.
Check the polarity of the door opening opera
tion, and set it correctly.
sary to set the polarity of the door operation.
Check the polarity of the door opening opera
tion, and set it correctly.
1
Use MULTI-CONTROL to select
Door mute 1 in the initial setting menu.
Refer to Adjusting initial settings on page 35.
Refer to Adjusting initial settings on page 35.
2
Press MULTI-CONTROL to select setting.
Each press of
MULTI-CONTROL selects set
tings in the following order:
High (high)
High (high)
Low (low)
! If the polarity changes to + (positive) when
the door is opened, select
High.
! If the polarity changes to (negative) when
the door is opened, select
Low.
Setting the door mute setting
Sound from this system is muted or attenu
ated automatically when the vehicle door is
opened.
! Sound from this system returns to normal
ated automatically when the vehicle door is
opened.
! Sound from this system returns to normal
when the muting or attenuation is can
celed.
celed.
Initial Settings
En
38
Section
04